位置:51电子网 » 企业新闻

PGA-102+

发布时间:2019/11/8 17:36:00 访问次数:49发布企业:深圳市创宝来科技有限公司


Monolithic Amplifier
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com Page 1 of 5
The Big Deal
Product Overview
PGA-102+ (RoHS compliant) is an advanced wideband amplifier fabricated using E-PHEMT technology
and offers extremely high dynamic range over a broad frequency range and with low noise figure. In addition,
the PGA-102+ has good input and output return loss over a broad frequency range without the need
for external matching components and has demonstrated excellent reliability. Lead finish is SnAgNi. It has
repeatable performance from lot to lot and is enclosed in a SOT-89 package for very good thermal performance.
Feature Advantages
Broad Band: 0.05 to 6.0 GHz
Broadband covering primary wireless communications bands:
Cellular, PCS, LTE, WiMAX
High IP3
Versus DC power Consumption:
33 dBm typical at 2 GHz at +3.3V
Supply Voltage and only 83mA
The PGA-102+ provides good IP3 performance relative to device size and power consumption.
The combination of the design and E-PHEMT Structure provides enhanced
linearity over a broad frequency range as evidence in the IP3 being typically 15 dB above
the P 1dB point. This feature makes this amplifier ideal for use in:
• Driver amplifiers for complex waveform up converter paths
• Drivers in linearized transmit systems
• Secondary amplifiers in ultra High Dynamic range receivers
No External Matching Components
Required
Unlike competing products, Mini-Circuits PGA-102+ provides Input and Output Return Loss
of 16-19 dB up to 4 GHz without the need for any external matching components
Low Noise Figure:
2.3 dB up to 0.8 GHz
A unique feature of the PGA-102+ which separates this design from all competitors is the
low noise figure performance in combination with the high dynamic range.
PGA-102+
Key Features
50Ω 0.05 to 6 GHz
SOT-89 PACKAGE
• High IP3
• Broadband High Dynamic Range
without external Matching Components
Ultra High Dynamic Range
☛ LTE Performance
Monolithic Amplifier
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com Page 2 of 5
simplified schematic and pin description
Function Pin Number Description
RF IN 1
RF input pin. This pin requires the use of an external DC blocking capacitor chosen for
the frequency of operation.
RF-OUT and DC-IN 3
RF output and bias pin. DC voltage is present on this pin; therefore a DC blocking
capacitor is necessary for proper operation. An RF choke is needed to feed DC bias
without loss of RF signal due to the bias connection, as shown in “Recommended Application
Circuit”, Fig. 2
GND 2,4
Connections to ground. Use via holes as shown in “Suggested Layout for PCB Design”
to reduce ground path inductance for best performance.
0.05-6 GHz
CASE STYLE: DF782
PGA-102+
Product Features
• 3.3V, 83mA operation
• High IP3, 33 dBm typ. at 2 GHz
• Gain, 14.0 dB typ. at 2 GHz
• P1dB 17.5 dBm typ. at 2 GHz
• Low noise figure, 2.4dB at 2 GHz
• No external matching components required
REV. B
M151107
PGA-102+
TH/RS/CP
150924
General Description
PGA-102+ (RoHS compliant) is an advanced wideband amplifier fabricated using E-PHEMT technology
and offers extremely high dynamic range over a broad frequency range and with low noise figure. In
addition, the PGA-102+ has good input and output return loss over a broad frequency range without the
need for external matching components. Lead finish is SnAgNi. It has repeatable performance from lot to
lot and is enclosed in a SOT-89 package for very good thermal performance.
Typical Applications
• Base station infrastructure
• Portable Wireless
• CATV & DBS
• MMDS & Wireless LAN
• LTE
3 RF-OUT & DC-IN
2 GROUND
1 RF-IN
RF-IN 4 RF-OUT
and DC-IN
GND
Low Noise, High IP3
☛ LTE Performance
+RoHS Compliant
The +Suffix identifies RoHS Compliance. See our web site
for RoHS Compliance methodologies and qualifications
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com
Monolithic E-PHEMT MMIC Amplifier
Page 3 of 5
Parameter Ratings
Operating Temperature (ground lead) -40°C to 85°C
Storage Temperature -65°C to 150°C
Operating Current at 3.3V 300 mA
Power Dissipation 1.0 W
Input Power (CW) 28 dBm
DC Voltage on Pin 3 5.5 V
Note:
Permanent damage may occur if any of these limits are exceeded.
Electrical maximum ratings are not intended for continuous normal operation.
Absolute Maximum Ratings
Electrical Specifications1 at 25°C, 50Ω and 3.3V, unless noted
PGA-102+
Parameter Condition
(GHz)
Min. Typ. Max. Units
Frequency Range 0.05 6 GHz
Gain 0.05 — 17.7 — dB
0.8 14.4 15.9 17.4
2.0 — 14.0 —
3.0 — 12.5 —
4.0 — 11.5 —
6.0 — 10.4 —
Input Return Loss 0.05 — 14.0 — dB
0.8 15 18.4 —
2.0 — 12.4 —
3.0 — 10.5 —
4.0 — 9.4 —
6.0 — 6.7 —
Output Return Loss 0.05 — 18.3 — dB
0.8 15 18.6 —
2.0 — 17.6 —
3.0 — 17.1 —
4.0 — 15.3 —
6.0 — 11.0 —
Reverse Isolation 2.0 21.9 dB
Output Power @1 dB compression 0.05 — 17.6 — dBm
0.8 16.0 17.4 —
2.0 — 17.5 —
3.0 — 17.5 —
4.0 — 17.3 —
6.0 — 16.5 —
Output IP3 0.05 30.8 dBm
0.8 32.7
2.0 33.0
3.0 33.0
4.0 33.4
6.0 33.2
Noise Figure 0.05 2.1 dB
0.8 2.3
2.0 2.4
3.0 2.8
4.0 3.0
6.0 3.9
Device Operating Voltage 3.1 3.3 3.5 V
Device Operating Current 60 83 120 mA
Device Current Variation vs. Temperature 49 μA/°C
Device Current Variation vs Voltage 0.066 mA/mV
Thermal Resistance, junction-to-ground lead 73 °C/W
1. Measured on Mini-Circuits Characterization test board TB-313. See Characterization Test Circuit (Fig.
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com
Monolithic E-PHEMT MMIC Amplifier
Page 4 of 5
PGA-102+
Fig 1. Block Diagram of Test Circuit used for characterization. (DUT tested on Mini-Circuits Characterization test board TB-313)
Gain, Return loss, Output power at 1dB compression (P1 dB) , output IP3 (OIP3) and noise figure measured using Agilent’s N5242A
PNA-X microwave network analyzer.
Conditions:
1. Gain and Return loss: Pin= -25dBm
2. Output IP3 (OIP3): Two tones, spaced 10 MHz apart, 2.5 dBm/tone at output.
Characterization Test Circuit
PGA1
Recommended Application Circuit
Fig 2. Evaluation board includes case, connectors, and components soldered to PCB
Product Marking
RF-IN 3 RF-OUT
Vcc (Supply voltage)
BLK-18+ Bias-Tee
ZX85-12G-S+
1
DUT
TB-313
2,4
+3.3V
Cblock=0.001μF, Bias-Tee=TCBT-14+, Cbypass=0.1μF
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com
Monolithic E-PHEMT MMIC Amplifier
Page 5 of 5
PGA-102+
Visual
Inspection
Electrical Test SAM Analysis
Reflow 3 cycles,
260°C
Soak
85°C/85RH
168 hours
Bake at 125°C,
24 hours
Visual
Inspection
Electrical Test SAM Analysis
Start
MSL Test Flow Chart
ESD Rating
Human Body Model (HBM): Class 1B (500 to <1000V) in accordance with ANSI/ESD STM 5.1 - 2001
Machine Model (MM): Class M1(50V) in accordance with ANSI/ESD STM5.2-1999
MSL Rating
Moisture Sensitivity: MSL1 in accordance with IPC/JEDEC J-STD-020D
Attention
Observe precautions
for handling electrostatic
sensitive devices
Performance Data
Data Table
Swept Graphs
S-Parameter (S2P Files) Data Set (.zip file)
Case Style DF782 (SOT 89) Plastic package, exposed paddle
lead finish: tin-silver over nickel
Tape & Reel F55
Standard quantities available on reel 7” reels with 20, 50, 100, 200, 500 or 1K devices
Suggested Layout for PCB Design PL-313
Evaluation Board TB-596-1+
Environmental Ratings ENV08T1
Additional Detailed Technical Information
additional information is available on our dash board. To access this information click here
All Datasheets Cannot Be Modified Without Permission
Copyright © Each Manufacturing Company
This datasheet has been downloaded from:
datasheet.eeworld.com.cn
Free Download
Daily Updated Database
100% Free Datasheet Search Site
100% Free IC Replacement Search Site
Convenient Electronic Dictionary
Fast Search System
www.EEworld.com.cn

PGA-102+

上一篇:PGA-103+

下一篇:NCS2333

相关新闻

相关型号