位置:51电子网 » 企业新闻

PMA2-162LN+

发布时间:2019/11/8 17:32:00 访问次数:53发布企业:深圳市创宝来科技有限公司


Monolithic Amplifier
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com Page 1 of 5
The Big Deal
• Ultra Low Noise Figure, 0.5 dB
• High Gain, High IP3
• Class 1B HBM ESD (500V)
• May be used as a replacement for MGA-631P8 a,b
Product Overview
Mini-Circuits PMA2-162LN+ is a E-PHEMT based Ultra-Low Noise MMIC Amplifier with a unique combinations
of low noise and high IP3 making this amplifier ideal for sensitive high dynamic range receiver applications.
This design operates on a single 4V supply.
Feature Advantages
Ultra Low Noise, 0.5 dB at 1.0 GHz Outstanding world class noise figure performance.
High IP3, +30 dBm at 1.0 GHz
Combining Low Noise and High IP3 makes this MMIC amplifier ideal for use in Low
Noise Receiver Front End (RFE) as it gives the user advantages at both ends of the
dynamic range: sensitivity & two-tone IM performance.
Adjustable Gain By changing feedback resistor R1, gain can be changed from19.7 to 23.5 dB at 1GHz
2mm x 2mm 8 lead MCLP Package Low Inductance, repeatable transitions, excellent thermal contact to PCB
Max Input Power, +25 dBm
Ruggedized design operates up to high input powers often seen at Receiver inputs
eliminating the need for an external resistor.
High Reliability
Low, small signal operating current of 55 mA nominal maintains junction temperatures
typically below 100°C at 85°C ground lead temperature.
Class 1B ESD (500V HBM)
The PMA2-162LN+ is a super low noise PHEMT based design. Mini-Circuits incorporates
ESD protection on die to achieve industry leading ESD performance for a low
noise amplifier.
Key Features
Notes:
a. Suitability for model replacement within a particular system must be determined by and is solely the responsibility of the customer based on, among other things, electrical
performance criteria, stimulus conditions, application, compatibility with other components and environmental conditions and stresses.
b. The Avago MGA-631P8 part number is used for identification and comparison purposes only.
2mm x 2mm
PMA2-162LN+
50Ω 0.7 to 1.6 GHz
Ultra Low Noise, High IP3
☛ LTE Performance
Monolithic Amplifier
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com Page 2 of 5
simplified schematic
Function Pad Number Description
RF IN 2 Connects to RF input via C1 and Pad 3 via L1
RF-OUT & DC-IN 7 Connects to RF out via C2, Pad 5 via R1, and C3
RF-Ground 3 Connects to ground via C4 and Pad 2 via L1
Bias 4 Connects to Supply voltage (Vs) via Rbias
Feedback 5 Connected to pads 7, 4 via R1 and C3
No Connection 1,6 Not used internally. Pin 1 Connected to ground on test board
Ground 8 & paddle Connects to ground
CASE STYLE: MC1631
PMA2-162LN+
Product Features
• Low Noise figure, 0.5 dB at 1 GHz
• High IP3, 30 dBm typ. at 1 GHz
• Adjustable gain, 19.7-23.5 dB at 1 GHz
• High Pout, P1dB 20 dBm typ. at 1 GHz
• Class 1B HBM ESD Rating (500V)
REV. B
M151107
PMA2-162LN+
TH/RS/CP/AM
151215
General Description
The PMA2-162LN+ (RoHS compliant) amplifier is fabricated using E-PHEMT technology and offers
extremely high dynamic range with ultra low noise figure and good input and output return loss. Lead finish
is Matte Tin plate. It has repeatable performance from lot to lot and is enclosed in a 2mm x 2mmx 0.55mm
package for very good thermal performance.
Typical Applications
• Base station infrastructure
• Portable Wireless
• LTE
• GPS
• GSM
• Airborne radar
0.7-1.6 GHz
Ultra Low Noise, High IP3
2
4
5
7
3
8, paddle
RF-Out and DC-IN
☛ LTE Performance
+RoHS Compliant
The +Suffix identifies RoHS Compliance. See our web site
for RoHS Compliance methodologies and qualifications
Monolithic E-PHEMT MMIC Amplifier
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com Page 3 of 5
Parameter Ratings
Operating Temperature (ground lead) -40°C to 85°C
Storage Temperature -65°C to 150°C
Junction Temperature 150°C
Total Power Dissipation 0.55 W
Input Power (CW), Vd=4V 25 dBm
DC Voltage 5.5V
Note:
Permanent damage may occur if any of these limits are exceeded.
Electrical maximum ratings are not intended for continuous normal operation.
Absolute Maximum Ratings
Electrical Specifications(1,2) at 25°C and 4V, unless noted
PMA2-162LN+
Parameter Condition
(GHz)
R1=267Ω (1) R1=93Ω (2)
Min. Typ. Max. Min. Typ. Max. Units
Frequency Range 0.7 1.6 0.7 1.6 GHz
(1) Measured on Mini-Circuits Characterization test board TB-615+. See Characterization Test Circuit (Fig. 1) R1=267Ω
(2) Measured on Mini-Circuits Characterization test board TB-615+. See Characterization Test Circuit (Fig. 1) R1=93Ω
(3) Current increases at P1dB
(4) (Current at 85°C -
Current at -45°C)/130
DC Current (mA)
Noise Figure
0.7 0.55 0.57
dB
0.8 0.51 0.54
1.0 0.47 0.48
1.3 0.64 0.65
1.6 0.80 0.81
Gain
0.7 — 24.4 — — 22.7
dB
0.8 — 24.1 — — 22.2
1.0 20.9 22.7 24.5 18.6 20.8 23.1
1.3 — 20.7 — — 19.1
1.6 — 18.8 — — 17.7
Input Return Loss
0.7 9.5 11.5
dB
0.8 15.5 18.8
1.0 17.9 20.0
1.3 12.4 14.5
1.6 10.8 12.4
Output Return Loss
0.7 13.6 21.6
dB
0.8 16.1 17.8
1.0 18.9 16.0
1.3 15.6 15.1
1.6 10.7 11.6
Output Power @1 dB compression(3)
0.7 19.5 18.3
dBm
0.8 19.8 18.9
1.0 19.9 19.7
1.3 19.7 19.8
1.6 18.8 19.0
Output IP3
0.7 29.1 28.3
dBm
0.8 30.3 29.5
1.0 30.0 29.0
1.3 30.1 29.2
1.6 29.4 28.5
Device Operating Voltage 3.8 4.0 4.2 3.8 4.0 4.2 V
Device Operating Current at 4V 55 60 55 60 mA
Device Current Variation vs. Temperature at 4V(4) 2 2 μA/°C
Device Current Variation vs Voltage at 25°C 0.016 0.016 mA/mV
Thermal Resistance, junction-to-ground lead 53 53 °C/W
Monolithic E-PHEMT MMIC Amplifier
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com Page 4 of 5
PMA2-162LN+
Fig 1. Application and Characterization circuit
Note: This block diagram is used for characterization. (DUT soldered on Mini-Circuits Characterization test board TB-615+)
Gain, Return loss, Output power at 1dB compression (P1 dB) , output IP3 (OIP3) and noise figure measured using Agilent’s N5242A
PNA-X microwave network analyzer.
Conditions:
1. Gain and Return loss: Pin= -25dBm
2. Output IP3 (OIP3): Two tones, spaced 1 MHz apart, 0 dBm/tone at output.
Recommended Application and Characterization Test Circuit
Adjustable Gain Performance (vs. R1)
Product Marking
PMA2
162L
black body
model family designation
Pad Connections
S21 (AMPLITUDE,dB) Vs. Freqency and R1 Values
15
17
19
21
23
25
27
700 900 1100 1300 1500
RF(MHz)
S21 (AMPLITUDE) (dB)
R1=57.6_Ohm
R1=93.1_Ohm
R1=267_Ohm
R1=562_Ohm
S22 (AMPLITUDE,dB) Vs. Freqency and R1 Values
-35
-30
-25
-20
-15
-10
-5
0
700 900 1100 1300 1500
RF(MHz)
S22 (AMPLITUDE) (dB)
R1=57.6_Ohm
R1=93.1_Ohm
R1=267_Ohm
R1=562_Ohm
S11 (AMPLITUDE,dB) Vs. Freqency and R1 Values
-35
-30
-25
-20
-15
-10
-5
0
700 900 1100 1300 1500
RF(MHz)
S11 (AMPLITUDE) (dB)
R1=57.6_Ohm
R1=93.1_Ohm
R1=267_Ohm
R1=562_Ohm
index over pin 1
NOISE FIGURE (dB) Vs. Freqency and R1 Values
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1
700 900 1100 1300 1500
RF(MHz)
NOISE FIGURE (dB)
R1=57.6_Ohm
R1=93.1_Ohm
R1=267_Ohm
R1=562_Ohm
Rbias
1,8, paddle
TB-615+
Top View
Monolithic E-PHEMT MMIC Amplifier
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com Page 5 of 5
PMA2-162LN+
Visual
Inspection
Electrical Test SAM Analysis
Reflow 3 cycles,
260°C
Soak
85°C/85RH
168 hours
Bake at 125°C,
24 hours
Visual
Inspection
Electrical Test SAM Analysis
Start
MSL Test Flow Chart
ESD Rating
Human Body Model (HBM): Class 1B (500 to <1000V) in accordance with ANSI/ESD STM 5.1 - 2001
Machine Model (MM): Class M1 (pass 25V) in accordance with ANSI/ESD STM5.2-1999
MSL Rating
Moisture Sensitivity: MSL1 in accordance with IPC/JEDEC J-STD-020D
Performance Data
Data Table
Swept Graphs
S-Parameter (S2P Files) Data Set (.zip file)
Case Style MC1631 Plastic package, exposed paddle, lead finish: matte tin
Tape & Reel F108
Standard quantities available on reel 7” reels with 20, 50, 100, 200, 500,1K or 2K devices
Suggested Layout for PCB Design PL-344
Evaluation Board TB-615+
Environmental Ratings ENV08T1
Additional Detailed Technical Information
additional information is available on our dash board. To access this information click here
All Datasheets Cannot Be Modified Without Permission
Copyright © Each Manufacturing Company
This datasheet has been downloaded from:
datasheet.eeworld.com.cn
Free Download
Daily Updated Database
100% Free Datasheet Search Site
100% Free IC Replacement Search Site
Convenient Electronic Dictionary
Fast Search System
www.EEworld.com.cn

PMA2-162LN+

上一篇:PMA2-33LN+

下一篇:PGA-105+

相关新闻

相关型号