位置:51电子网 » 企业新闻

PMA2-43LN+

发布时间:2019/11/8 17:30:00 访问次数:53发布企业:深圳市创宝来科技有限公司


Page 1 of 6
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com
Monolithic Amplifier
The Big Deal
• Ultra low noise figure, 0.46 dB
• High gain, high IP3
• Small size, 2 x 2 x 1mm
Product Overview
Mini-Circuits PMA2-43LN+ is an E-PHEMT based, ultra-low noise MMIC amplifier with a unique
combination of low noise and high IP3, making this amplifier ideal for sensitive, high-dynamic-range
receiver applications. This design operates on a single 5V supply, is well matched for 50Ω systems, and
comes in a tiny, low profile package, accommodating dense circuit board layouts.
Feature Advantages
Ultra-low noise, 0.46 dB at 1.9 GHz Enables lower system noise figure performance
High IP3
• +32.9 dBm at 1.9 GHz
• +32.6 dBm at 2.5 GHz
Combination of low noise and high IP3 makes this MMIC amplifier ideal for use in low
noise receiver front end (RFE) as it gives the user advantages of sensitivity & two-tone
IM performance at both ends of the dynamic range.
Low operating voltage, 5V Achieves high IP3 using low voltage.
2 x 2mm 8-lead MCLP package
Tiny footprint saves space in dense layouts while providing low inductance, repeatable
transitions, and excellent thermal contact to the PCB.
High max input power
• +22 dBm (5 minutes)
• +14 dBm (continuous)
Ruggedized design provides high power handling for input powers common at receiver
inputs, eliminating the need for an external limiter in most cases.
High reliability
Low signal operating current of 51 mA nominal maintains junction temperatures typically
below 103 °C at 85°C ground lead temperature.
Key Features
2mm x 2mm
PMA2-43LN+
50Ω 1.1 to 4.0 GHz
Ultra Low Noise, High IP3
Page 2 of 6
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com
Monolithic Amplifier
simplified schematic & pad description
Function Pad Number Description (See Figure 1)
RF IN 2 Connects to RF input via C1 and Pad 1 via L1
RF-OUT & DC-IN 7 Connects to RF out via C2 and VS via L2 & R2
Ground Paddle Connects to ground
Bias 1 Connects to Supply voltage (VS) via R1 & Rb
No Connection 3,4,5,6,8 Not used internally. Connected to ground on test board
CASE STYLE: MC1631-1
PMA2-43LN+
Product Features
• Ultra Low Noise figure, 0.46 dB at 1.9 GHz
• High IP3, 33 dBm typ. at 1.9 GHz
• High Pout, P1dB 19.9 dBm typ. at 1.9 GHz
REV. A
M151107
PMA2-43LN+
TH/RS/CP
150924
General Description
The PMA2-43LN+ (RoHS compliant) amplifier is fabricated using 0.25 μm E-PHEMT technology and offers
extremely high dynamic range with ultra low noise figure and good input and output return loss. Lead finish
is SnAgNi. It has repeatable performance from lot to lot and is enclosed in a 2mm x 2mmx 1mm package
for very good thermal performance.
Typical Applications
• Base station infrastructure
• Portable Wireless
• LTE
• GPS
• GSM
• Airborne radar
1.1-4.0 GHz
Ultra Low Noise, High IP3
+RoHS Compliant
The +Suffix identifies RoHS Compliance. See our web site
for RoHS Compliance methodologies and qualifications
(TOP VIEW)
Monolithic E-PHEMT MMIC Amplifier
Page 3 of 6
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com
Parameter Ratings
Operating Temperature (ground lead) -40°C to 85°C
Storage Temperature -65°C to 150°C
Junction Temperature 150°C
Total Power Dissipation 0.7 W
Input Power (CW), Vd=3V(Note 5) +22 dBm (5minutes max)
+14 dBm (continuous)
DC Voltage +6V
Note:
(4) Permanent damage may occur if any of these limits are exceeded.
Electrical maximum ratings are not intended for continuous normal operation.
(5) Measured on Mini-Circuits test board, TB-805+
Absolute Maximum Ratings4
PMA2-43LN+
(1) Measured on Mini-Circuits Characterization test board TB-805+. See Characterization Test Circuit (Fig. 1)
(2) Current increases at P1dB
(3) (Current at 85°C -
Current at -45°C)/130
Electrical Specifications(1) at 25°C and 5V, unless noted
Parameter Condition (GHz) Min. Typ. Max. Units
Frequency Range 1.1 4.0 GHz
Noise Figure 1.1 0.41 — dB
1.5 0.45 —
1.9 0.46 0.69
2.5 0.66 —
4.0 1.08 —
Gain 1.1 — 23.4 — dB
1.5 — 21.6 —
1.9 18.0 19.9 22.01
2.5 — 17.6 —
4.0 — 12.9 —
Input Return Loss 1.1 13.8 dB
1.5 19.1
1.9 16.6
2.5 14.1
4.0 11.9
Output Return Loss 1.1 9.6 dB
1.5 11.9
1.9 12.3
2.5 10.6
4.0 6.7
Output Power at 1dB Compression 1.1 18.6 dBm
1.5 19.4
1.9 19.9
2.5 19.7
4.0 17.1
Output IP3 1.1 30.3 dBm
1.5 32.3
1.9 32.9
2.5 32.6
4.0 32.2
Device Operating Voltage (VDD) 5.0 V
Device Operating Current (IDD) 51 64 mA
Device Current Variation vs. Temperature2 -72 μA/°C
Device Current Variation vs. Voltage 0.018 mA/mV
Thermal Resistance, junction-to-ground lead 61 °C/W
Monolithic E-PHEMT MMIC Amplifier
Page 4 of 6
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com
PMA2-43LN+
Recommended Application and Characterization Test Circuit
Product Marking
PMA2
43LN
black body
model family designation
index over pin 1
Fig 1. Application and Characterization circuit
ote: This block diagram is used for characterization. (DUT soldered on Mini-Circuits Characterization test board TB-805+)
Gain, Return loss, Output power at 1dB compression (P1 dB) , output IP3 (OIP3) and noise figure measured using Agilent’s
N5242A PNA-X microwave network analyzer.
Conditions:
1. Gain and Return loss: Pin= -25dBm
2. Output IP3 (OIP3): Two tones, spaced 1 MHz apart, 0 dBm/tone at output.
Component Value Size
C1, C2 1000pF 0402
C5, C6 4.7μF 0402
C3, C4 100pF 0402
L1 10nH 0402
L2 8.2nH 0402
R1 49.9Ω 0402
R2 0Ω 0603
Rb 5.11kΩ 0402
Monolithic E-PHEMT MMIC Amplifier
Page 5 of 6
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com
PMA2-43LN+
NOTES:
1) DUT soldered on test board (50 ohm input and output)
2) Reference plane is at the end of the RF-IN pad and the output reference plane
is at the end of the RF-OUT pad as shown in figure below
3) For data at 40,60,70 & 80 mA, data can be found in S-parameter files and can
be downloaded from model dash-board.
RF-Input
Reference
Plane
RF-Output
Reference
Plane
Noise Parameters1,2,3 (at 50 mA)
Frequency
(MHz)
Fmin (dB)
Γ Γopt
Magnitude
Γopt
Angle
Rn/50
800 0.30685 0.30526 35.6809 0.0355
1000 0.26955 0.22781 55.5866 0.04071
1500 0.3318 0.2206 70.2411 0.04477
2000 0.36648 0.17466 105.4381 0.04181
2500 0.49583 0.15779 136.4273 0.04675
3000 0.72974 0.18394 171.8723 0.05229
3500 1.06048 0.18076 -165.7368 0.07601
4000 0.9203 0.21115 -136.0472 0.08972
Monolithic E-PHEMT MMIC Amplifier
Page 6 of 6
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com
PMA2-43LN+
ESD Rating
Human Body Model (HBM): Class 1A (250 to <500V) in accordance with ANSI/ESD STM 5.1 - 2001
Machine Model (MM): Class M1 (pass 25V) in accordance with ANSI/ESD STM5.2-1999
MSL Rating
Moisture Sensitivity: MSL1 in accordance with IPC/JEDEC J-STD-020D
Performance Data
Data Table
Swept Graphs
S-Parameter (S2P Files) Data Set (.zip file)
Case Style MC1631-1 Plastic package, exposed paddle, lead finish: tin silver over nickel
Tape & Reel F66
Standard quantities available on reel 7” reels with 20, 50, 100, 200, 500,1K or 2K devices
Suggested Layout for PCB Design PL-400
Evaluation Board TB-805+
Environmental Ratings ENV08T1
Additional Detailed Technical Information
additional information is available on our dash board. To access this information click here
MSL Test Flow Chart
Additional Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended
to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s
applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms
and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits
contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder,
please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Visual
Inspection
Electrical Test SAM Analysis
Reflow 3 cycles,
260°C
Soak
85°C/85RH
168 hours
Bake at 125°C,
24 hours
Visual
Inspection
Electrical Test SAM Analysis
Start
Finish
All Datasheets Cannot Be Modified Without Permission
Copyright © Each Manufacturing Company
This datasheet has been downloaded from:
datasheet.eeworld.com.cn
Free Download
Daily Updated Database
100% Free Datasheet Search Site
100% Free IC Replacement Search Site
Convenient Electronic Dictionary
Fast Search System
www.EEworld.com.cn



PMA2-43LN+

相关新闻

相关型号