位置:51电子网 » 企业新闻

PMA3-83LN资料

发布时间:2019/11/8 10:05:00 访问次数:35发布企业:深圳市创宝来科技有限公司


PMA3-83LN+

Page 1 of 5
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com
Monolithic Amplifier
The Big Deal
• Flat gain over wideband
• Low noise figure, 1.3 dB
• High IP3, up to +35 dBm
Product Overview
The PMA3-83LN+ is a PHEMT based wideband, low noise MMIC amplifier with a unique combination of
low noise, high IP3, and flat gain over wideband making it ideal for sensitive, high-dynamic-range receiver
applications. This design operates on a single 5V or 6V supply, is well matched for 50Ω and comes in a
tiny, low profile package (3 x 3 x 0.89mm), accommodating dense circuit board layouts.
Feature Advantages
Low noise, 1.3 dB at 2 GHz Enables lower system noise figure performance.
High IP3
• +35 dBm at 2 GHz
• +28.5 dBm at 8 GHz
Combination of low noise and high IP3 makes this MMIC amplifier ideal for use in low
noise receiver front end (RFE) as it gives the user advantages of sensitivity and twotone
IM performance at both ends of the dynamic range.
Low operating voltage, 5V/6V. Achieves high IP3 using low voltage.
3 x 3mm 12-lead MCLP package
Tiny footprint saves space in dense layouts while providing low inductance, repeatable
transitions, and excellent thermal contact to the PCB.
Wide bandwidth with flat gain
• ±0.9 dB over 0.5 to 7 GHz
• ±1.5 dB over 0.5 to 8 GHz
Enables a single amplifier to be used in many wideband applications including defense,
instrumentation and more.
Key Features
PMA3-83LN+
50Ω 0.5 to 8.0 GHz
Low Noise, Wideband, High IP3
CASE STYLE: DQ1225
Page 2 of 5
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com
Monolithic Amplifier
simplified schematic & pad description
Function Pad Number Description (See Figure 1)
RF-IN 2
Connects to RF input and to ground via L1
(optional blocking capacitor of 100pF may be used)
RF-OUT & DC-IN 8 Connects to RF out via C3 and VDD via L2
Ground Paddle Connects to ground
No Connection 1,3 to 7, 9 to 12 Not used internally. Connected to ground on test board (except 11 and 12)
CASE STYLE: DQ1225
PMA3-83LN+
Product Features
• Low Noise figure, 1.3 dB at 2 GHz
• High IP3, 35 dBm typ. at 2 GHz
• High Pout, P1dB 20.7 dBm typ. at 2 GHz and 6V
• Excellent Gain flatness, ±0.9 dB over 0.5 to 7 GHz and 6V
REV. A
M154390
PMA3-83LN+
RS/CP
151222
General Description
The PMA3-83LN+ is a PHEMT based wideband, low noise MMIC amplifier with a unique combination of
low noise, high IP3, and flat gain over wideband making it ideal for sensitive, high-dynamic-range receiver
applications. This design operates on a single 5V or 6V supply, is well matched for 50Ω and comes in a
tiny, low profile package (3 x 3 x 0.89mm), accommodating dense circuit board layouts.
Typical Applications
• WiFi
• WLAN
• UMTS
• LTE
• WiMAX
• S-band Radar
• C-band Satcom
0.5-8.0 GHz
Low Noise, Wideband, High IP3
+RoHS Compliant
The +Suffix identifies RoHS Compliance. See our web site
for RoHS Compliance methodologies and qualifications
Monolithic E-PHEMT MMIC Amplifier
Page 3 of 5
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com
Absolute Maximum Ratings4
Parameter Ratings
Operating Temperature (ground lead) -40°C to 85°C
Storage Temperature -65°C to 150°C
Junction Temperature 150
Total Power Dissipation 0.95 W
Input Power (CW), Vd=5,6V5 +19 dBm (5 minutes max.)
+16 dBm (continuous)
DC Voltage 7 V
4. Permanent damage may occur if any of these limits are exceeded.
Electrical maximum ratings are not intended for continuous normal operation.
5. Measured on Mini-Circuits test board, TB-830A+
PMA3-83LN+
1. Measured on Mini-Circuits Characterization test board TB-830A+. See Characterization Test Circuit (Fig. 1)
2. Current increases at P1dB to 109 mA typ. at +6V VDD and 88mA typ. at +5V VDD
3. (Current at 85°C -
Current at -45°C)/130
Electrical Specifications1 at 25°C and 5V, unless noted
Parameter Condition
(GHz)
VDD=6.0 VDD=5.0 Units
Min. Typ. Max. Typ.
Frequency Range 0.5 8.0 0.5-8.0 GHz
Noise Figure 0.5 1.8 — 1.9 dB
2.0 1.3 1.7 1.3
4.0 1.5 — 1.5
8.0 2.2 — 2.2
Gain 0.5 — 21.8 — 21.0 dB
2.0 19.9 22.1 24.3 21.3
4.0 — 21.5 — 20.8
8.0 — 19.2 — 18.7
Input Return Loss 0.5 14.2 13.1 dB
2.0 16.0 16.0
4.0 13.0 12.2
8.0 6.3 6.3
Output Return Loss 0.5 12.9 13.7 dB
2.0 13.0 14.3
4.0 28.8 27.5
8.0 12.9 12.6
Output Power at 1dB Compression2 0.5 18.6 16.3 dBm
2.0 20.7 19.1
4.0 19.6 17.6
8.0 18.0 17.3
Output IP3 0.5 34.2 29.7 dBm
2.0 35.2 30.0
4.0 34.0 29.6
8.0 28.5 26.2
Device Operating Voltage (VDD) 6.0 — 5.0 V
Device Operating Current (IDD) 77 94 60 mA
Device Current Variation vs. Temperature3 -152 — -109 μA/°C
Device Current Variation vs. Voltage 0.016 0.016 mA/mV
Thermal Resistance, junction-to-ground lead 47 47 °C/W
Monolithic E-PHEMT MMIC Amplifier
Page 4 of 5
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com
PMA3-83LN+
Recommended Application and Characterization Test Circuit
Product Marking
83LN
black body
model family designation
index over pin 1
Fig 1. Application and Characterization circuit
Note: This block diagram is used for characterization. (DUT soldered on Mini-Circuits Characterization test board TB-830A+)
Gain, Return loss, Output power at 1dB compression (P1 dB) , output IP3 (OIP3) and noise figure measured using Agilent’s
N5242A PNA-X microwave network analyzer.
Conditions:
1. Gain and Return loss: Pin= -25dBm
2. Output IP3 (OIP3): Two tones, spaced 1 MHz apart, 0 dBm/tone at output.
Component Value Size
C1 0.01μF 0402
C2 10pF 0402
C3 100pF 0402
L1 18nH 0402
L2 39nH 0402
0
Monolithic E-PHEMT MMIC Amplifier
Page 5 of 5
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com
PMA3-83LN+
ESD Rating
Human Body Model (HBM): Class 1A (250 to <500V) in accordance with ANSI/ESD STM 5.1 - 2001
Machine Model (MM): Class M1 (pass 50V) in accordance with ANSI/ESD STM5.2-1999
MSL Rating
Moisture Sensitivity: MSL1 in accordance with IPC/JEDEC J-STD-020D
Performance Data
Data Table
Swept Graphs
S-Parameter (S2P Files) Data Set (.zip file)
Case Style DQ1225 Plastic package, exposed paddle, lead finish: tin silver over nickel
Tape & Reel F66
Standard quantities available on reel 7” reels with 20, 50, 100, 200, 500,1K or 2K devices
Suggested Layout for PCB Design PL-456
Evaluation Board TB-830A+
Environmental Ratings ENV08T1
Additional Detailed Technical Information
additional information is available on our dash board. To access this information click here
MSL Test Flow Chart
Additional Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended
to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s
applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms
and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits
contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder,
please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Visual
Inspection
Electrical Test SAM Analysis
Reflow 3 cycles,
260°C
Soak
85°C/85RH
168 hours
Bake at 125°C,
24 hours
Visual
Inspection
Electrical Test SAM Analysis
Start
Finish
All Datasheets Cannot Be Modified Without Permission
Copyright © Each Manufacturing Company
This datasheet has been downloaded from:
datasheet.eeworld.com.cn
Free Download
Daily Updated Database
100% Free Datasheet Search Site
100% Free IC Replacement Search Site
Convenient Electronic Dictionary
Fast Search System
www.EEworld.com.cn



上一篇:PMA4-33GLN+

下一篇:SPP80N06S2-H5

相关新闻

相关型号