位置:51电子网 » 企业新闻

PMA-545G1+

发布时间:2019/11/8 9:57:00 访问次数:55发布企业:深圳市创宝来科技有限公司

Monolithic Amplifier
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com Page 1 of 5
The Big Deal
• High Gain, 31.5 dB
• Low Noise Figure, 1.0 dB
• High IP3, 32-35 dBm
Product Overview
Mini-Circuits PMA-545G1+ is a E-PHEMT based Low Noise MMIC Amplifier operating from 0.4 to 2.2 GHz
with a unique combination of low noise and high IP3 making this amplifier ideal for sensitive receiver applications.
This design operates on a single +5V supply and is internally matched to 50 Ohms.
Feature Advantages
High Gain 26-33 dB
Incorporating multiple stages of amplification, the PMA-545G1+ provides high
gain reducing cost and PCB board space.
Ultra Low Noise: 0.9 dB NF at 0.9 GHz
Excellent Noise Figure, measured in a 50 Ohm environment – without any external
matching. When combined with high gain of this design, it suppresses
second stage NF contribution.
High IP3: +34 dBm IP3 at 0.9 GHz
Combining Low Noise and High IP3 makes this MMIC amplifier ideal for Low
Noise Receiver Front End (RFE) giving the user advantages at both ends of
the dynamic range: sensitivity & two-tone IM dynamic range
Output Power: +22 dBm at 0.9 GHz
The PMA-545G1+ maintains consistent output power capability over the full
operating temperature range making it ideal to be used in remote applications
such as LNB’s as the L Band driver stage
Internally Matched
No external matching elements required to achieve the advertized noise and
output power over the full band
MCLP Package Low Inductance, repeatable transitions, excellent thermal pad
Max Input Power +25 dBm
Ruggedized design operates up to input powers often seen at Receiver
inputs.
High Reliability
Low, small signal operating current of 160 mA nominal maintains junction
temperatures typically below 130°C at 85°C ground lead temperature
Key Features
3mm x 3mm MCLP Pkg
PMA-545G1+
50Ω 0.4 to 2.2 GHz
LTE Performance
Low Noise, High IP3
Monolithic Amplifier
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com Page 2 of 5
Product Features
• High Gain, 31.5 dB typ. at 0.9 GHz
• Ultra Low Noise Figure, 0.9 dB typ. at 0.9 GHz
• High IP3, 34 dBm typ. 0.9 GHz
• Output Power, up to +22dBm typ. at 0.9 GHz
• Single Positive Supply Voltage, 5V
• Micro-miniature size - 3mm x 3mm
• Aqueous washable
Typical Applications
• Cellular
• ISM
• GSM
• WCDMA
• LTE
• GPS
General Description
PMA-545G1+ is a high dynamic range, low noise, high IP3, high output power, monolithic amplifier. Manufactured
using E-PHEMT* technology enables it to work with a single positive supply voltage. Unconditionally
stable over the operating frequency.
REV. A
M151107
PMA-545G1+
TH/RS/CP/AM
150924
0.4 - 2.2 GHz
PMA-545G1+
CASE STYLE: DQ849
simplified schematic and pad description
RF IN (2)
N/C (1)
RF-OUT & DC (5)
GND
NC (6)
NC (8)
BIAS (7)
NC (3) BIAS (4)
RF-IN RF-OUT
and DC
BIAS
Function Pad
Number Description (See Application Circuit, Fig. 2)
RF-IN 2 RF input pad (connected to RF-IN via C1)
RF-OUT & DC 5
RF output pad (connected to RF-OUT via blocking external cap C2, and Supply
voltage Vs via RF Choke L2)
BIAS 4 & 7 Bias pad 4 connects to Vs via L1 & pad 7 connects to Vs
GND paddle in center of bottom Connected to ground
NOT USED 1,3,6,8 No internal connection; recommended use: per PCB Layout PL-346
*Enhancement mode Pseudomorphic High Electron Mobility Transistor.
+RoHS Compliant
The +Suffix identifies RoHS Compliance. See our web site
for RoHS Compliance methodologies and qualifications
Low Noise, High IP3
LTE Performance
Monolithic Low Noise E-PHEMT MMIC Amplifier
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com Page 3 of 5
Electrical Specifications(1) at 25°C, Vd=5V, Zo=50Ω, (refer to characterization circuit)
Parameter Condition (GHz) Min. Typ. Max. Units
Frequency Range 0.4 2.2 GHz
DC Voltage (Vd) 4.8 5.0 5.2 V
DC Current 158 186 mA
Noise Figure
0.4 1.2 —
dB
0.9 0.9 —
1.2 1.0 1.4
1.6 1.0 —
2.2 1.2 —
Gain
0.4 — 32.9 —
dB
0.9 — 31.5 —
1.2 28.1 31.3 34.5
1.6 — 30.2 —
2.2 — 26.1 —
Input Return Loss
0.4 9.5
dB
0.9 11.6
1.2 11.9
1.6 14.6
2.2 19.9
Output Return Loss
0.4 21.3
dB
0.9 17.5
1.2 16.1
1.6 15.1
2.2 14.2
Output IP3
0.4 31.7
dBm
0.9 33.4
1.2 33.6
1.6 33.8
2.2 33.6
Output Power @ 1 dB compression (2)
0.4 — 20.5
dBm
0.9 — 21.9
1.2 20.0 22.2
1.6 — 22.4
2.2 — 22.6
DC Current Variation vs. Temperature (3) -0.156 mA/°C
DC Current Variation vs. Voltage 0.027 mA/mV
Thermal Resistance 48 °C/W
Absolute Maximum Ratings(4)
Parameter Ratings
Operating Temperature (5) -40°C to 85°C
Storage Temperature -65°C to 150°C
Channel Temperature 150°C
DC Voltage (Pad 4,5,7) 6V
Power Dissipation 1.35W
Input Power 25dBm
(1) Measured on Mini-Circuits Characterization test board TB-607-1+
See Characterization Test Circuit (Fig. 1)
(3) (Current at 85°C - Current at -45°C)/130
(4) Permanent damage may occur if any of these limits are exceeded.
These maximum ratings are not intended for continuous normal operation.
(5) Defined with reference to ground pad temperature.
PMA-545G1+
DC Current Histogram
0
5
10
15
20
25
30
35
40
45
<120
120-125
125-130
130-135
135-140
140-145
145-150
150-155
155-160
160-165
165-170
170-175
175-180
180-185
185-190
>190
Current (mA)
Monolithic Low Noise E-PHEMT MMIC Amplifier
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com Page 4 of 5
Characterization Test Circuit
PMA-545G1+
Fig 1. Block Diagram of Test Circuit used for characterization. (DUT soldered on Mini-Circuits Characterization Test Board TB-607-1) Gain, Output
power at 1dB compression (P1dB), Output IP3 (OIP3), Noise Figure are measured using Agilent’s N5242A PNA-X microwave network analyzer.
Conditions:
1. Gain: Pin=-25 dBm
2. Output IP3 (OIP3): Two tones, spaced 1 MHz apart, 0 dBm/tone at output.
3. Vs adjusted for 5V at device (Vd), compensating loss of bias tee.
Recommended Application Circuit
(refer to evaluation board for PCB Layout and component values)
Component Description
DUT PMA-545G1+
C1, C2, C5, C6 100 pF
C3, C4 1μF
R1 0 Ω
L1 36 nH
L2 47 nH
Product Marking
MCL
545G
black body
model family designation
Monolithic Low Noise E-PHEMT MMIC Amplifier
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com Page 5 of 5
Visual
Inspection
Electrical Test SAM Analysis
Reflow 3 cycles,
260°C
Soak
85°C/85RH
168 hours
Bake at 125°C,
24 hours
Visual
Inspection
Electrical Test SAM Analysis
Start
MSL Test Flow Chart
Human Body Model (HBM): Class 1B (500V to <1000V) in accordance with ANSI/ESD STM 5.1 - 2001
Machine Model (MM): Class M1 (passes 40V) in accordance with ANSI/ESD STM5.2-1999; passes 40V
MSL Rating
Moisture Sensitivity: MSL1 in accordance with IPC/JEDEC J-STD-020D
ESD Rating
PMA-545G1+
Performance Data
Data Table
Swept Graphs
S-Parameter (S2P Files) Data Set (.zip file)
Case Style DQ849 Plastic package, exposed paddle, lead finish: tin-silver over nickel
Tape & Reel F104
Standard quantities available on reel 7” reels with 20, 50, 100, 200, 500,1K or 2K devices
Suggested Layout for PCB Design PL-346
Evaluation Board TB-607-1+
Environmental Ratings ENV08T1
Additional Detailed Technical Information
additional information is available on our dash board. To access this information click here
All Datasheets Cannot Be Modified Without Permission
Copyright © Each Manufacturing Company
This datasheet has been downloaded from:
datasheet.eeworld.com.cn
Free Download
Daily Updated Database
100% Free Datasheet Search Site
100% Free IC Replacement Search Site
Convenient Electronic Dictionary
Fast Search System
www.EEworld.com.cn


PMA-545G1+

相关新闻

相关型号