位置:51电子网 » 企业新闻

PSA4-5043+

发布时间:2019/11/8 9:45:00 访问次数:40发布企业:深圳市创宝来科技有限公司

Low Noise, High IP3
Monolithic Amplifier
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com Page 1 of 5
The Big Deal
Product Overview
Mini-Circuits PSA4-5043+ is a E-PHEMT based Ultra-Low Noise MMIC Amplifier operating from 50 MHz to
4 GHz with a unique combination of low noise and high IP3 making this amplifier ideal for sensitive high dynamic
range receiver applications. This design operates on +3 to +5V supply at only 33 mA at 3V and 56mA
at +5V, is internally matched to 50 ohms and is supplied in a super small SC-70 (SOT-343) MSL 1 package.
Key Features
50Ω 0.05 to 4 GHz
CASE STYLE: MMM1362
Feature Advantages
Ultra Low Noise:
0.75 dB at 1 GHz
0.98 dB at 2 GHz
Outstanding Noise Figure, measured in a 50 Ohm environment without any external matching
High IP3, 33.5 dBm
Combining Low Noise and High IP3 makes this MMIC amplifier ideal for Low Noise
Receiver Front End (RFE) because it gives the user advantages at both ends of the dynamic
range: sensitivity & two-tone spur-free dynamic range
High Output Power, +21 dBm
The PSA4-5043+ provides up to +21dBm output power at 1dB compression enabling this amplifier
to support high linear dynamic range requirements.-
Broad Band, up to 4 GHz
Operating over a broadband from 50 MHz to 4 GHz, the PSA4-5043+ covers the primary wireless
communications bands: Cellular, PCS, LTE, WiMAX
Internally Matched
No external matching elements required to achieve the advertised noise and output power over the
full band
SOT-343 Package Small size, industry standard package
High Reliability
Low, small signal operating current of 53mA nominal maintains junction temperatures typically
below 125°C at 85°C ground lead temperature
Class 1B ESD (500V, HBM)
The PSA4-5043+ is a super low noise PHEMT based design. Unlike many other PHEMT designs.
Mini-Circuits incorporates ESD protection on die to achieve industry leading ESD performance for
a low noise amplifier.
• Ultra Low Noise Figure, 0.75 dB
• High IP3 and Po at low DC power consumption
• May be used as a replacement for SPF5043Za,b
• Class 1B HBM ESD rating (500V)
Notes:
a. Suitability for model replacement within a particular system must be determined by and is solely the responsibility of the customer based on, among other things, electrical performance
criteria, stimulus conditions, application, compatibility with other components and environmental conditions and stresses.
b. The RFMD SPF5043Z part number is used for identification and comparison purposes only.
PSA4-5043+
Low Noise, High IP3
Monolithic Amplifier
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com Page 2 of 5
Product Features
• Ultra Low Noise Figure, 0.75 dB typ. at 1 GHz
• Class 1B ESD rating (500V)
• High IP3, up to 33.5 dBm typ. at 1 GHz
• Output Power at 1dB comp., up to +21 dBm typ.
• Gain, 18.4 dB typ. at 1GHz
• Supply Voltage, +3V, Id=33mA, +5V, Id=56mA
• Aqueous washable
• May be used as a replacement for SPF5043Z a,b
Typical Applications
• Cellular
• ISM
• GSM
• WCDMA
• LTE
• WiMax
• WLAN
• GPS
PSA4-5043+
REV. B
M151107
PSA4-5043+
RS/TH
150924
0.05-4 GHz
CASE STYLE: MMM1362
Function Pin
Number
Description (See Application Circuit, Fig. 2)
RF IN 3 RF input pin (connect to RF-IN via DC blocking cap)
RF-OUT & DC-IN 1
RF output pin (connected to RF-out via blocking cap C2 and supply voltage Vd
via RF Choke L1)
GND 2,4
Connections to ground: use via holes as shown in “Suggested Layout for PCB
Design” to reduce ground path inductance for best performance.
* Enhancement mode pseudomorphic High Electron Mobility Transistor.
simplified schematic and pin description
General Description
PSA4-5043+ is an advanced wide band, high dynamic range, low noise, high IP3, high output power,
monolithic amplifier. Manufactured using E-PHEMT* technology enables it to work with a single positive
supply voltage.
RF-IN RF-OUT
and DC-IN
Notes:
a. Suitability for model replacement within a particular system must be determined by and is solely the responsibility of the customer based on, among other things, electrical performance
criteria, stimulus conditions, application, compatibility with other components and environmental conditions and stresses.
b. The The RFMD SPF-5043Z part number is used for identification and comparison purposes only.
RF OUT
and DC-IN
GND
GND
RF IN
+RoHS Compliant
The +Suffix identifies RoHS Compliance. See our web site
for RoHS Compliance methodologies and qualifications
Monolithic MMIC Amplifier
Page 3 of 5
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com
Electrical Specifications(1) at 25°C, Zo=50Ω, (refer to characterization circuit, Fig. 1)
Absolute Maximum Ratings(4)
Parameter Ratings
Operating Temperature(5) -40°C to 85°C
Storage Temperature -65°C to 150°C
Channel Temperature 150°C
DC Voltage 6V
Device Current 76 mA
Power Dissipation 380 mW
Input Power (CW) 23 dBm (5 minutes max), 17dBm (continous)
Vd=5.0V(1) Vd=3.0V(1)
Parameter Condition
(GHz) Min. Typ. Max. Min. Typ. Max. Units
Frequency Range 0.05 4.0 0.05 4.0 GHz
at DC Volts (Vd) 5.0 3.0 V
DC Current (Id) 58 66 33 mA
Noise Figure
0.05 0.73 — 0.66
dB
0.5 0.65 — 0.66
1.0 0.75 1.1 0.73
2.0 0.98 — 0.94
3.0 1.1 — 1.1
4.0 1.44 — 1.3
Gain
0.05 — 25.4 — 24.3
dB
0.5 — 22.1 — 21.2
1.0 16.5 18.4 20.2 17.5
2.0 — 13.3 — 12.5
3.0 — 10.2 — 9.6
4.0 — 8.0 — 7.2
Input Return Loss
0.05 7.8 6.5
dB
0.5 10.5 9.4
1.0 11.4 10.6
2.0 12.2 11.1
3.0 12.8 10.4
4.0 11.1 9.2
Output Return Loss
0.05 13.7 13.2
dB
0.5 15.0 15.9
1.0 13.9 15.1
2.0 12.5 14.5
3.0 11.7 13.3
4.0 12.8 15.7
Output IP3
0.05 31.0 28.0
dBm
0.5 32.1 28.0
1.0 33.5 28.7
2.0 32.7 30.0
3.0 33.6 31.0
4.0 32.6 31.0
Output Power @1dB compression (2)
0.05 18.9 15.8
dBm
0.5 19.3 16.5
1.0 19.8 17.4
2.0 20.7 19.0
3.0 21.2 19.4
4.0 21.5 19.8
DC Current Variation Vs. Temperature(3) -0.007 -0.007 mA/°C
DC Current Variation Vs. Voltage 0.01 0.01 mA/mV
Thermal Resistance(5) 117 117 °C/W
PSA4-5043+
(1) Measured on Mini-Circuits Characterization test board TB-471+.
See Characterization Test Circuit (Fig. 1)
(2) Current increases at P1dB
(3) (Current at 85°C - Current at -45°C)/130
(4) Permanent damage may occur if any of these limits are exceeded.
These maximum ratings are not intended for continuous normal operation.
(5) Defined with reference to ground pad temperature.
PSA4-5043+
DC Current Vd=5V
47-49
49-51
51-53
53-55
55-57
57-59
59-61
61-63
63-65
65-67
>67
Current (mA)
USL
Monolithic MMIC Amplifier
Page 4 of 5
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com
PSA4-5043+
Fig 1. Block Diagram of Test Circuit used for characterization. (DUT soldered on Mini-Circuits Characterization Test Board TB-471+)
Gain, Return loss, Output power at 1dB compression (P1 dB), Output IP3 (OIP3) and Noise Figure measured using Agilent’s
N5242A PNA-X microwave network analyzer.
Conditions:
1. Gain: Pin= -25dBm
2. Output IP3 (OIP3): Two tones, spaced 1 MHz apart, 5 dBm/tone at output.
Characterization Test Circuit
RF-IN RF-OUT
DUT
TB-471+
Vd
I
d
3 2,4
3/5V
Bias-Tee
ZX85-12G-S+
I
ds
Vs (Supply voltage)
BLK-18+
1
Recommended Application Circuit
(refer to evaluation board for PCB Layout and component values)
Fig 2. Recommended Application Circuit
Note: Resistance of L1, 0.1-0.2Ω typically
3
3 or 5V
C1
1
2,4
L1
C3
C2
RF-IN RF-OUT
(Vs)
Ids
Id
Product Marking
black body
laser or white ink marking
Monolithic MMIC Amplifier
Page 5 of 5
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com
Visual
Inspection
Electrical Test SAM Analysis
Reflow 3 cycles,
260°C
Soak
85°C/85RH
168 hours
Bake at 125°C,
24 hours
Visual
Inspection
Electrical Test SAM Analysis
Start
MSL Test Flow Chart
ESD Rating
Human Body Model (HBM): Class 1B (500 to <1000V) in accordance with ANSI/ESD STM 5.1 - 2001
Machine Model (MM): Class M1 (pass 35V) in accordance with ANSI/ESD STM5.2-1999; passes 35V
MSL Rating
Moisture Sensitivity: MSL1 in accordance with IPC/JEDEC J-STD-020D
PSA4-5043+
Additional Detailed Technical Information
additional information is available on our dash board. To access this information click here
Performance Data
Data Table
Swept Graphs
S-Parameter (S2P Files) Data Set (.zip file)
Case Style MMM1362
Plastic molded SOT-343 package, lea finishi: matte tin
Tape & Reel F90
Standard quantities available on reel 7” reels with 20, 50, 100, 200, 500 or 1K devices.
Suggested Layout for PCB Design PL-361
Evaluation Board TB-653+
Environmental Ratings ENV08T2
All Datasheets Cannot Be Modified Without Permission
Copyright © Each Manufacturing Company
This datasheet has been downloaded from:
datasheet.eeworld.com.cn
Free Download
Daily Updated Database
100% Free Datasheet Search Site
100% Free IC Replacement Search Site
Convenient Electronic Dictionary
Fast Search System
www.EEworld.com.cn


PSA4-5043+

上一篇:PSA-5454+

下一篇:SPP30N03

相关新闻

相关型号