位置:51电子网 » 企业新闻

RLP06470R0JB00

发布时间:2019/11/6 9:22:00 访问次数:38发布企业:深圳市创宝来科技有限公司

RLP
www.vishay.com Vishay Sfernice
Revision: 02-Apr-15 1 Document Number: 50009
For technical questions, contact: sferfixedresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Insulated Precision Wirewound Resistors Axial Leads
In wirewound precision resistors, the RLP series holds a
leading position in professional applications whenever an
excellent stability of the ohmic value and a correspondingly
low temperature coefficient are required at the same time.
The RLP model resistors comply with the most stringent
requirements of the CECC 40-201-006 specification. The
series consists of 5 models covering the power range from
1 W to 10 W.
Non-inductive versions can be supplied on request by
specifying RLP-NI. For higher power dissipations, the use of
RH series resistors is recommended.
FEATURES
• 1 W to 10 W at 25 °C
• Approved according to CECC 40-201-006
• According to MIL-R-26/5C and MIL-R-26/6C
• Excellent stability < ± 0.3 % after 1000 h
• High power up to 10 W at 25 °C
• Low ohmic values 10 m available
• Low temperature coefficient  ± 50 ppm/°C
• Electrical insulation
• Climatic protection
• Termination = Pure matte tin or Sn/Ag/Cu according to the
ohmic value
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Note
• Undergoes European Quality Insurance System (CECC)
DIMENSIONS in millimeters
SERIES
AND STYLE A MAX.
Ø B MAX.
E ± 0.1 WEIGHT
g
R > 0.15  R  0.15 
RLP1 7 2.5 - 0.6 0.27
RLP2 10.2 4.0 6 0.6 0.48
RLP3 14 5.54 9 0.8 1.3
RLP6 23.82 8.71 11 0.8 3.4
RLP10 46.78 10.32 180K 0.8 8.6
TECHNICAL SPECIFICATIONS
VISHAY SFERNICE SERIES AND STYLE RLP1 RLP2 RLP3 RLP6 RLP10
Reference CECC 40-201-006 A B C D E
Cross-Reference NF C83-210 RP8 RP7 RP4 RP5 RP6
Cross-Reference MIL-R-26/5C and MIL-R-26/6C RW81 RW80 RW79 RW74 RW78
Power Rating, Pr
CECC 40-201-006 Power at 25 °C, P25
at 70 °C, P70
1 W
0.8 W
1.5 W
1.25 W
2.5 W
2 W - -
Extended Sfernice Power at 25 °C, P25
at 70 °C, P70
1 W
0.8 W
2 W
1.65 W
3 W
2.5 W
6 W
5 W
10 W
8.2 W
Ohmic Range in Relation to Tolerance
± 5 % E24 0.05  to
2 k
0.025  to
6.8 k
0.01  to
15 k
0.02  to
59 k
0.06  to
150 k
± 2 % E48 0.05  to
2 k
0.025  to
6.8 k
0.03  to
15 k
0.02  to
59 k
0.06  to
150 k
± 1 % E96 0.05  to
2 k
0.025  to
6.8 k
0.03  to
15 k
0.02  to
59 k
0.06  to
150 k
± 0.5 % E96 0.4  to
2 k
0.4  to
6.8 k
0.0499  to
15 k
0.3  to
59 k
0.3  to
150 k
± 0.1 % E96 Please consult Vishay Sfernice
Qualified Ohmic Value Range 
CECC 40-201-006
1  to
470 
0.2  to
1.78 k
0.1  to
3.57 k
0.1  to
12.1 k
0.1  to
40.2 k
Limiting Element Voltage, Umax. AC/DC 50 V 120 V 200 V 300 V 720 V
Critical Resistance Out of nominal ohmic range 17 800 W 51 100 W
25 min. 25 min. A
25 min. 25 min. A
Ø B Ø E
Ø B Ø E
L max.
4 4
Ø a ± 0.02
RLP1 - RLP2 a = 1 mm
RLP3 - 6 - 10 a = 1.2 mm
INSULATED
MOLDED
45° chamfer
max. 0.25 mm
deep
RLP1 - RLP2
RLP
www.vishay.com Vishay Sfernice
Revision: 02-Apr-15 2 Document Number: 50009
For technical questions, contact: sferfixedresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
STANDARD ELECTRICAL SPECIFICATIONS
MODEL
RESISTANCE
RANGE

RATED POWER
P25 °C
W
TOLERANCE
± %
RLP1 0.05 to 2K 1 0.1, 0.2, 0.5, 1, 2, 5
RLP2 0.025 to 6.8K 2 0.1, 0.2, 0.5, 1, 2, 5
RLP3 0.01 to 15K 3 0.1, 0.2, 0.5, 1, 2, 5
RLP6 0.02 to 59K 6 0.1, 0.2, 0.5, 1, 2, 5
RLP10 0.06 to 150K 10 0.1, 0.2, 0.5, 1, 2, 5
MECHANICAL SPECIFICATIONS
Series and Style RLP1, RLP2 RLP3, RLP6, RLP10
Encapsulant High temperature
mold compound
High temperature
silicone coating
Resistive Element CuNi or NiCr
Ceramic Substrate Alumina or steatite
Termination Pure matte tin or Sn/Ag/Cu
ENVIRONMENTAL SPECIFICATIONS
Temperature Range -55 °C to 275 °C
Climatic Category
(LCT/UCT/days) 55/200/56
PERFORMANCE
TESTS CONDITIONS
REQUIREMENTS
(R/R OR INDICATED PARAMETER)
CECC 40-201-006
Short Time Overload
IEC 60115-1
6.25 PrExtended Sfernice Power or U = 2 Umax./5 s
for RLP1, RLP2, RLP3
12 PrExtended Sfernice Power or U = 2 Umax./5 s
for RLP6, RLP10
± (0.25 % + 0.05 )
Load Life
IEC 60115-1
90’/30’ cycles
1000 h PrExtended Sfernice Power + 25 °C
± (0.5 % + 0.05 )
Insulation R  1 G
Dielectric w/s Voltage IEC 60115-1
URMS = 500 V/60 s
No flashover or breakdown
Leakage current < 10 μA
Rapid Change of Temperature
IEC 60115-1
IEC 60068-2-14 Test Na
5 cycles (30’ at LCT/30’ at UCT)
-55 °C / +200 °C
± (0.25 % + 0.05 )
Climatic Sequence IEC 60115-1
-55 °C / +200 °C/56 days ± (0.5 % + 0.05 )
Humidity (Steady State)
IEC 60115-1
IEC 60068-2-3 Test Ca
95 % HR/40 °C
56 days
± (0.5 % + 0.05 )
Insulation R  100 M
Shock
IEC 60115-1
IEC 60068-2-27 Test Ea
50 g’s/half sine/
3 times by direction (i.e. 18 shocks)
± (0.25 % + 0.05 )
Vibration
IEC 60115-1
IEC 60068-2-6 Test Fc
10 Hz / 55 Hz
± (0.25 % + 0.05 )
Load Life at Upper Category
Temperature
IEC 60115-1
90’ / 30’ cycles
1000 h PrExtended Sfernice Power +200 °C
± (0.5 % + 0.05 )
Insulation R  1 G
RLP
www.vishay.com Vishay Sfernice
Revision: 02-Apr-15 3 Document Number: 50009
For technical questions, contact: sferfixedresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
STABILITY AND POWER RATING
Stability changes slightly according to power rating and ambient temperature. This fact is especially important for users needing
a life drift lower than the initial resistance tolerance. Typical drifts, after 2000 h life test made under the 90’ / 30’ conditions and
at an ambient temperature of 25 °C, are:
POWER RATING
NON INDUCTIVE WINDING (NI)
Non inductive (Ayrton Perry) winding available.
Please consult Vishay Sfernice.
INDUCTANCE (Example)
TEMPERATURE RISE
MARKING
Vishay Sfernice trademark, series, style, CECC style (if
applicable) nominal resistance (in , k), tolerance (in %),
manufacturing date.
TEMPERATURE COEFFICIENT in the range -55 °C to +200 °C
OHMIC RANGE REQUIREMENT
CECC 40-201-006
< 1  ± 100 ppm/°C
1  to < 10  ± 50 ppm/°C
 10  ± 25 ppm/°C
OHMIC RANGE RLP1 RLP2 RLP3 RLP6 RLP10 R %/R %
Pr 1 W 2 W 3 W 5 W 10 W 0.3
0.5 Pr 0.5 W 1 W 1.5 W 2.5 W 5 W 0.15
AMBIENT TEMPERATURE IN °C
RATED POWER IN %
125
100
75
50
37
25
0
0 50 100 150 200 250 275 300 350
FREQUENCY IN MHz
1.4
1.3
1.2
1.1
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
0 0.1 1 10
RLP3 100 W
INDUCTANCE IN μH
RLP3 NI 100 W
PACKAGING (see datasheet 50032 and 50033)
Reel of 1000 units for RLP1, RLP2, RLP3
Ammopack of 500 units for RLP1, RLP2, RLP3
Bag of 100 units for RLP1, RLP2
Blister of 20 units for RLP3
Box of 50 units for RLP6, RLP10
RATED POWER IN W HOT SPOT TEMPERATURE IN °
C
250
200
150
100
50
0
0 1.5 3.0 4.5 6.0 7.5 10.0
2PLR
1PLR
3PLR
6PLR
01PLR
RLP
www.vishay.com Vishay Sfernice
Revision: 02-Apr-15 4 Document Number: 50009
For technical questions, contact: sferfixedresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
ORDERING INFORMATION
RLP 01 5R500 J R15
MODEL STYLE OHMIC VALUE TOLERANCE PACKAGING
GLOBAL PART NUMBER INFORMATION
GLOBAL
MODEL SIZE OPTION OHMIC VALUE TOLERANCE PACKAGING SPECIAL
RLP 01
02
03
06
10
N = non inductive winding The first four digits are
significant figures and the
last digit specifies the
number of zeros to follow.
R designates decimal point.
680R0 = 680 
20301 = 20.3 k
88R88 = 88.88 
...
B = 0.1 %
C = 0.2 %
D = 0.5 %
F = 1 %
G = 2 %
J = 5 %
Standard packaging:
Size 01 and 02:
S14 = bag, 100 pieces
size 03:
B15 = bulk, 20 pieces
size 06 and 10:
B25 = box, 50 pieces
As applicable
Ex = MEX
R L P 0 6 1 5 0 R 0 J B 0 0
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 08-Feb-17 1 Document Number: 91000
Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
All Datasheets Cannot Be Modified Without Permission
Copyright © Each Manufacturing Company
This datasheet has been downloaded from:
datasheet.eeworld.com.cn
Free Download
Daily Updated Database
100% Free Datasheet Search Site
100% Free IC Replacement Search Site
Convenient Electronic Dictionary
Fast Search System
www.EEworld.com.cn



RLP06470R0JB00

相关新闻

相关型号