位置:51电子网 » 企业新闻

SAV-541+

发布时间:2019/11/6 9:14:00 访问次数:64发布企业:深圳市创宝来科技有限公司

Ultra Low Noise, Medium Current
E-PHEMT
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com Page 1 of 13
SAV-541+
REV. C
M123887
ED-13377
SAV-541+
150319
0.45-6GHz
CASE STYLE: MMM1362
PRICE: $1.39 ea. QTY. (20)
Product Features
• Low Noise Figure, 0.5 dB
• Gain, 17 dB at 2 GHz
• High Output IP3, +33 dBm
• Output Power at 1dB comp., +20 dBm
• High Current, 60mA
• Wide bandwidth
• External biasing and matching required
• May be used as replacement a,b for Avago ATF-54143
Typical Applications
• Cellular
• ISM
• GSM
• WCDMA
• WiMax
• WLAN
• UNII and HIPERLAN
Function Pin Number Description
Source 2 & 4 Source terminal, normally connected to ground
Gate 3 Gate used for RF input
Drain 1 Drain used for RF output
General Description
SAV-541+ is an ultra-low noise, high IP3 transistor device, manufactured using E-PHEMT* technology
enabling it to work with a single positive supply voltage. It has outstanding Noise Figure, particularly below
2.5 GHz, and when combining this noise figure with high IP3 performance in a single device it makes
it an ideal amplifier for demanding base station applications. We offer these units assembled into a complete
module, 50Ω in/out, noise matched and fully specified. For more information please see our TAMP
family of models on our web site.
simplified schematic and pin description
GATE
S OUR CE
DR AIN
DR AIN 1
3 GATE
4 S OUR CE
S OUR CE 2
SOT-343 (SC-70) PACKAGE
* Enhancement mode Pseudomorphic High Electron Mobility Transistor.
a. Suitability for model replacement within a particular system must be determined by and is solely the responsibility of the customer based on, among other things, electrical performance
criteria, stimulus conditions, application, compatibility with other components and environmental conditions and stresses.
b. The Avago ATF-54143 part number is used for identification and comparison purposes only.
+RoHS Compliant
The +Suffix identifies RoHS Compliance. See our web site
for RoHS Compliance methodologies and qualifications
E-PHEMT SAV-541+
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com Page 2 of 13
Symbol Parameter Condition Min. Typ. Max. Units
DC Specifications
VGS Operational Gate Voltage VDS=3V, IDS=60 mA 0.37 0.48 0.69 V
VTH Threshold Voltage VDS=3V, IDS=4 mA 0.18 0.26 0.38 V
IDSS Saturated Drain Current VDS=3V, VGS=0 V 1.0 5.0 μA
GM Transconductance
VDS=3V, Gm=Δ IDS/ΔVGS
ΔVGS=VGS1-VGS2
VGS1=VGS at IDS=60 mA
VGS2=VGS1+0.05V


230




392




560


mS
IGSS Gate leakage Current VGD=VGS=-3V 200 μA
RF Specifications, Z0=50 Ohms (Figure 1)
NF(1) Noise Figure VDS=3V, IDS=60 mA f=0.9 GHz 0.4 —
dB
f=2.0 GHz 0.5 0.9
f=3.9 GHz 1.0 —
f=5.8 GHz 1.9 —
VDS=4V, IDS=60 mA f=2.0 GHz 0.5 —
Gain Gain
VDS=3V, IDS=60 mA f=0.9 GHz — 23.2 —
dB
f=2.0 GHz 15.0 17.6 18.5
f=3.9 GHz — 12.5 —
f=5.8 GHz — 8.7 —
VDS=4V, IDS=60 mA f=2.0 GHz — 17.4 —
OIP3 Output IP3
VDS=3V, IDS=60 mA f=0.9 GHz — 32.6
dBm
f=2.0 GHz 30.0 33.1
f=3.9 GHz — 33.0
f=5.8 GHz — 31.0
VDS=4V, IDS=60 mA f=2.0 GHz 35.1
P1dB(2) Power output at 1 dB
Compression
VDS=3V, IDS=60 mA f=0.9 GHz 19.1
dBm
f=2.0 GHz 19.2
f=3.9 GHz 19.0
f=5.8 GHz 18.2
VDS=4V, IDS=60 mA f=2.0 GHz 21.5
Notes:
(1) Includes test board loss (tested on Mini-Circuits TB-471+ test board)
(2) Drain current was allowed to increase during compression measurements.
(3) Operation of this device above any one of these parameters may cause permanent damage.
(4) Assumes DC quiescent conditions.
(5) IGS is limited to 2 mA during test.
Absolute Maximum Ratings(3)
Symbol Parameter Max. Units
VDS
(4) Drain-Source Voltage 5 V
VGS
(4) Gate-Source Voltage -5 to 0.7 V
VGD
(4) Gate-Drain Voltage -5 to 0.7 V
IDS
(4) Drain Current 120 mA
IGS Gate Current 2 mA
PDISS Total Dissipated Power 360 mW
PIN
(5) RF Input Power 17 dBm
TCH Channel Temperature 150 °C
TOP Operating Temperature -40 to 85 °C
TSTD Storage Temperature -65 to 150 °C
ΘJC Thermal Resistance 160 °C/W
Electrical Specifications at TAMB=25°C, Frequency 0.45 to 6 GHz
E-PHEMT SAV-541+
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com Page 3 of 13
Fig 1. Block Diagram of Test Circuit used for characterization. (DUT soldered on Mini-Circuits Test Board TB-471+)
Gain, Output power at 1dB compression (P1 dB) and output IP3 (OIP3) are measured using R&S Network Analyzer ZVA-24.
Noise Figure measured using Agilent Noise Figure meter N8975A and Noise Source N4000A.
Conditions:
1. Drain voltage (with reference to source, VDS)= 3 or 4V as shown.
2. Gate Voltage (with reference to source, VGS) is set to obtain desired Drain-Source current (IDS) as shown in graphs or specification table.
3. Gain: Pin= -25dBm
4. Output IP3 (OIP3): Two tones, spaced 1 MHz apart, 0 dBm/tone at output.
5. No external matching components used.
Fig 2. Test Board used for characterization, Mini-Circuits P/N TB-471+ (Material: Rogers 4350, Thickness: 0.02”)
Characterization Test Circuit
E-PHEMT SAV-541+
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com Page 4 of 13
Typical Performance Curves
I-V (VGS=0.1V PER STEP) (2)
0
20
40
60
80
100
120
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0
VDS (V)
IDS (mA)
0.2V
0.3V
0.4V
0.5V
0.6V
0.7V
NOISE FIGURE vs IDS @ 0.9 GHz (1)
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
10 15 20 25 30 35 40 45 50 55 60 65 70 75 80
IDS (mA)
NOISE FIGURE (dB)
VDS=3V VDS=4V
F Min vs IDS @ 2 GHz (3)
0.25
0.27
0.29
0.31
0.33
0.35
0.37
0.39
0.41
0.43
0.45
10 15 20 25 30 35 40 45 50 55 60 65 70 75 80
IDS (mA)
F MIN (dB)
VDS=2V VDS=3V VDS=4V
GAIN vs IDS @ 2 GHz (1)
14.0
14.5
15.0
15.5
16.0
16.5
17.0
17.5
18.0
18.5
19.0
19.5
20.0
10 15 20 25 30 35 40 45 50 55 60 65 70 75 80
IDS (mA)
GAIN (dB)
VDS=3V VDS=4V
F Min vs IDS @ 0.9 GHz (3)
0.10
0.11
0.12
0.13
0.14
0.15
0.16
0.17
0.18
0.19
0.20
10 15 20 25 30 35 40 45 50 55 60 65 70 75 80
IDS (mA)
F MIN (dB)
VDS=2V VDS=3V VDS=4V
NOISE FIGURE vs IDS @ 2 GHz (1)
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
10 15 20 25 30 35 40 45 50 55 60 65 70 75 80
IDS (mA)
NOISE FIGURE(dB)
VDS=3V VDS=4V
(1) Includes test board loss, set-up and conditions per Figure 1.
(2) Measured using HP4155B semiconductor parameter analyzer.
(3) F Min is minimum Noise Figure.
(4) Drain Current was allowed to increase during compression measurement.
E-PHEMT SAV-541+
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com Page 5 of 13
(1) Includes test board loss, set-up and conditions per Figure 1.
(2) Measured using HP4155B semiconductor parameter analyzer.
(3) F Min is minimum Noise Figure.
(4) Drain Current was allowed to increase during compression measurement.
GAIN vs IDS @ 0.9 GHz (1)
19.0
19.5
20.0
20.5
21.0
21.5
22.0
22.5
23.0
23.5
24.0
24.5
25.0
10 15 20 25 30 35 40 45 50 55 60 65 70 75 80
IDS (mA)
GAIN (dB)
VDS=3V VDS=4V
P1dB vs IDS @ 2 GHz (1,4)
15
16
17
18
19
20
21
22
23
24
25
10 15 20 25 30 35 40 45 50 55 60 65 70 75 80
IDS (mA)
P1dB (dBm)
VDS=3V VDS=4V
P1dB vs IDS @ 0.9 GHz (1,4)
15
16
17
18
19
20
21
22
23
24
25
10 15 20 25 30 35 40 45 50 55 60 65 70 75 80
IDS (mA)
P1dB (dBm)
VDS=3V VDS=4V
NF vs FREQUENCY & TEMPERATURE (1)
@ VDS=3V, IDS=60mA
0.0
0.3
0.6
0.9
1.2
1.5
1.8
2.1
2.4
2.7
3.0
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0
FREQUENCY (GHz)
NOISE FIGURE (dB)
-40°C +25°C +85°C
OIP3 vs IDS @ 0.9 GHz (1)
15
20
25
30
35
40
45
10 15 20 25 30 35 40 45 50 55 60 65 70 75 80
IDS (mA)
OIP3 (dBm)
VDS=3V VDS=4V
OIP3 vs IDS @ 2GHz (1)
15
20
25
30
35
40
45
10 15 20 25 30 35 40 45 50 55 60 65 70 75 80
IDS (mA)
OIP3 (dBm)
VDS=3V VDS=4V
E-PHEMT SAV-541+
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com Page 6 of 13
GAIN vs FREQUENCY & TEMPERATURE (1)
@ VDS=3V, IDS=60mA
2
5
8
11
14
17
20
23
26
29
32
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0
FREQUENCY (GHz)
GAIN (dB)
-45°C +25°C +85°C
NF vs FREQUENCY & TEMPERATURE (1)
@ VDS=4V, IDS=60mA
0.0
0.3
0.6
0.9
1.2
1.5
1.8
2.1
2.4
2.7
3.0
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0
FREQUENCY (GHz)
NOISE FIGURE (dB)
-40°C +25°C +85°C
GAIN vs FREQUENCY & TEMPERATURE (1)
@ VDS=4V, IDS=60mA
2
5
8
11
14
17
20
23
26
29
32
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0
FREQUENCY (GHz)
GAIN (dB)
-45°C +25°C +85°C
OIP3 vs FREQUENCY & TEMPERATURE (1)
@ VDS=4V, IDS=60mA
25
27
29
31
33
35
37
39
41
43
45
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0
FREQUENCY (GHz)
OIP3 (dBm)
-45°C +25°C +85°C
P1dB vs FREQUENCY & TEMPERATURE (1,4)
@ VDS=3V, IDS=60mA
16
17
17
18
18
19
20
20
21
21
22
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0
FREQUENCY (GHz)
P1dB (dBm)
-45°C +25°C +85°C
OIP3 vs FREQUENCY & TEMPERATURE (1)
@ VDS=3V, IDS=60mA
25
27
29
31
33
35
37
39
41
43
45
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0
FREQUENCY (GHz)
OIP3 (dBm)
-45°C +25°C +85°C
(1) Includes test board loss, set-up and conditions per Figure 1.
(2) Measured using HP4155B semiconductor parameter analyzer.
(3) F Min is minimum Noise Figure.
(4) Drain Current was allowed to increase during compression measurement.
E-PHEMT SAV-541+
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com Page 7 of 13
P1dB vs FREQUENCY & TEMPERATURE (1,4)
@ VDS=4V, IDS=60mA
18
19
19
20
21
22
22
23
24
24
25
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0
FREQUENCY (GHz)
P1dB (dBm)
-45°C +25°C +85°C
F Min vs FREQ @ VDS=3V (3)
0.0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0
FREQUENCY (GHz)
F MIN (dB)
40 mA 60 mA 80 mA
Notes:
Noise parameters were measured over 0.5 to 6 GHz by Modelithics® using a solid state tuner-based noise parameter (NP) test
system available from Maury Microwave. F Min, optimimum source reflection coefficient and noise resistance values are calculated
values based on a set of measurements made at approximately 16 different impedances. Some data smoothing was applied to arrive
at the presented data set.
S-parameters were measured by Modelithics® on an Anritsu Lightning vector network analyzer over 0.1 to 18GHz using 350um
pitch RF probes from GGB industries combined with customized thru-reflect-line (TRL) calibration standards. The reference plane is
at the device package leads, as shown in the picture.
Fig 3. Reference Plane Location
Reference Plane Location for S and Noise Parameters (see data in pages 8-11)
(Refer to Application Note AN-60-040)
(1) Includes test board loss, set-up and conditions per Figure 1.
(2) Measured using HP4155B semiconductor parameter analyzer.
(3) F Min is minimum Noise Figure.
(4) Drain Current was allowed to increase during compression measurement.
E-PHEMT SAV-541+
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com Page 8 of 13
MAXIMUM STABLE GAIN (MSG)/MAXIMUM AVAILABLE
GAIN (MAG) vs. FREQUENCY
-15
-10
-5
0
5
10
15
20
25
30
35
40
0 5 10 15 20
Frequency (GHz)
MSG/MAG and S21 (dB)
MSG/MAG
S21(dB)
Freq.
(GHz)
S11 S21 S12 S22
MSG/MAG
Mag. Ang. Mag. (dB)
Mag
(dB) Ang. Mag. Ang. Mag. Ang.
Typical S-parameters, VDS=3V and IDS=40 mA (Fig. 3)
Typical Noise Parameters, VDS=3V and IDS=40 mA (Fig. 3)
Freq.
(GHz)
F Min.
(dB)
GOpt
(Magnitude)
GOpt
(Angle) Rn/50
Ga
Associated
Gain (dB)
0.5 0.071 0.34 27.00 0.05 27.9
0.7 0.101 0.35 37.65 0.05 25.7
0.9 0.131 0.35 48.14 0.04 23.9
1.0 0.146 0.36 53.32 0.04 23.2
1.9 0.281 0.39 98.07 0.03 18.3
2.0 0.296 0.39 102.83 0.03 17.9
2.4 0.356 0.40 121.48 0.03 16.6
3.0 0.446 0.42 148.20 0.03 15.0
3.9 0.581 0.45 -174.52 0.05 13.4
5.0 0.747 0.48 -133.51 0.10 11.9
5.8 0.867 0.50 -106.84 0.14 10.9
6.0 0.897 0.50 -100.59 0.15 10.6
0.1 0.99 -16.6 25.3 28.1 169.5 0.008 89.1 0.55 -14.7 34.8
0.5 0.86 -74.6 19.6 25.8 132.2 0.035 54.4 0.43 -55.3 27.5
0.9 0.75 -112.6 14.2 23.0 109.0 0.047 40.5 0.32 -83.3 24.8
1.0 0.74 -120.4 13.2 22.4 104.6 0.049 38.4 0.30 -89.5 24.3
1.5 0.68 -149.6 9.5 19.6 86.7 0.057 31.3 0.23 -114.1 22.3
1.9 0.66 -166.7 7.7 17.8 75.4 0.062 27.5 0.19 -131.2 21.0
2.0 0.66 -170.5 7.4 17.4 72.9 0.063 26.6 0.19 -135.2 20.7
2.5 0.65 172.8 6.0 15.6 61.0 0.07 22.9 0.17 -153.9 19.3
3.0 0.65 158.7 5.0 14.1 50.2 0.077 19.5 0.16 -171.3 18.2
4.0 0.66 134.4 3.8 11.6 30.0 0.091 11.9 0.16 156.7 15.8
5.0 0.68 113.5 3.0 9.7 11.1 0.104 2.7 0.18 130.5 13.3
6.0 0.71 94.7 2.5 8.0 -7.1 0.118 -7.5 0.22 109.1 11.7
7.0 0.75 77.8 2.1 6.4 -24.7 0.13 -18.3 0.28 90.7 10.5
8.0 0.78 62.4 1.8 5.0 -41.5 0.14 -29.4 0.33 74.8 9.6
9.0 0.82 47.8 1.5 3.6 -57.8 0.146 -41.0 0.40 60.0 9.0
10.0 0.85 33.7 1.3 2.3 -73.9 0.15 -52.7 0.46 46.1 8.8
11.0 0.88 20.6 1.1 1.0 -89.3 0.152 -64.4 0.53 33.2 8.7
12.0 0.90 8.4 1.0 -0.2 -104.0 0.153 -75.8 0.58 21.2 8.0
13.0 0.91 -3.5 0.9 -1.3 -118.3 0.154 -87.1 0.62 10.3 7.5
14.0 0.92 -14.4 0.8 -2.3 -131.9 0.154 -97.9 0.66 0.0 7.0
15.0 0.94 -23.0 0.7 -3.6 -143.0 0.148 -106.3 0.70 -8.7 6.5
16.0 0.95 -30.4 0.6 -4.9 -153.0 0.139 -114.2 0.75 -16.6 6.1
17.0 0.95 -39.0 0.5 -6.0 -164.0 0.134 -122.6 0.77 -25.2 5.7
18.0 0.94 -48.3 0.5 -6.9 -175.7 0.131 -131.4 0.79 -33.9 5.4
Notes:
F Min.: Minimum Noise Figure
GOpt: Optimum Source Reflection Coefficient
Rn: Equivalent noise resistance
E-PHEMT SAV-541+
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com Page 9 of 13
Typical S-parameters, VDS=3V and IDS=60 mA (Fig. 3)
Freq.
(GHz)
S11 S21 S12 S22
MSG/MAG
Mag. Ang. Mag. (dB)
Mag
(dB) Ang. Mag. Ang. Mag. Ang.
MAXIMUM STABLE GAIN (MSG)/MAXIMUM AVAILABLE
GAIN (MAG) vs. FREQUENCY
-15
-10
-5
0
5
10
15
20
25
30
35
40
0 5 10 15 20
Frequency (GHz)
MSG/MAG and S21 (dB)
MSG/MAG
S21(dB)
Typical Noise Parameters, VDS=3V and IDS=60 mA (Fig. 3)
Freq.
(GHz)
F Min.
(dB)
GOpt
(Magnitude)
GOpt
(Angle) Rn/50
Ga
Associated
Gain (dB)
0.5 0.076 0.31 26.60 0.05 28.1
0.7 0.109 0.32 38.07 0.05 26.0
0.9 0.141 0.32 49.32 0.04 24.3
1.0 0.158 0.32 54.87 0.04 23.5
1.9 0.304 0.34 102.31 0.03 18.7
2.0 0.320 0.35 107.31 0.03 18.3
2.4 0.385 0.36 126.75 0.03 17.0
3.0 0.482 0.38 154.28 0.04 15.5
3.9 0.629 0.42 -168.12 0.06 13.8
5.0 0.807 0.47 -128.17 0.11 12.2
5.8 0.937 0.52 -103.27 0.16 11.2
6.0 0.970 0.53 -97.59 0.18 11.0
0.1 0.99 -18.2 27.8 28.9 168.7 0.009 78.4 0.50 -14.8 35.0
0.5 0.85 -78.1 21.0 26.5 130.2 0.032 53.5 0.39 -60.2 28.1
0.9 0.74 -116.2 14.9 23.5 107.3 0.044 41.8 0.29 -90.1 25.3
1.0 0.72 -123.9 13.8 22.8 102.9 0.045 39.7 0.27 -96.8 24.9
1.5 0.67 -152.5 9.9 19.9 85.5 0.053 33.6 0.21 -122.9 22.7
1.9 0.65 -169.2 8.0 18.1 74.5 0.059 30.3 0.18 -140.6 21.4
2.0 0.65 -172.8 7.7 17.7 72.0 0.06 29.8 0.18 -144.8 21.0
2.5 0.65 170.9 6.2 15.9 60.5 0.068 26.6 0.17 -163.6 19.6
3.0 0.64 157.0 5.2 14.3 49.9 0.075 22.8 0.16 179.6 18.4
4.0 0.66 133.3 3.9 11.9 29.9 0.091 14.6 0.17 149.8 15.7
5.0 0.68 112.7 3.1 9.9 11.2 0.105 4.8 0.20 125.6 13.3
6.0 0.71 94.1 2.6 8.2 -6.8 0.12 -5.7 0.24 105.4 11.8
7.0 0.74 77.4 2.2 6.7 -24.1 0.132 -17.3 0.29 87.9 10.6
8.0 0.78 62.1 1.8 5.3 -40.8 0.142 -28.5 0.35 72.6 9.8
9.0 0.81 47.7 1.6 3.9 -56.9 0.149 -40.4 0.41 58.1 9.1
10.0 0.85 33.6 1.3 2.5 -72.8 0.152 -52.4 0.48 44.4 8.8
11.0 0.88 20.5 1.2 1.2 -88.0 0.154 -64.1 0.54 31.6 8.7
12.0 0.90 8.3 1.0 0.0 -102.6 0.154 -75.7 0.59 19.8 8.1
13.0 0.91 -3.5 0.9 -1.0 -116.9 0.155 -87.1 0.63 8.9 7.6
14.0 0.92 -14.4 0.8 -2.0 -130.4 0.155 -97.8 0.66 -1.3 7.1
15.0 0.93 -23.0 0.7 -3.2 -141.3 0.149 -106.3 0.71 -9.9 6.7
16.0 0.95 -30.5 0.6 -4.6 -151.3 0.14 -114.0 0.75 -17.6 6.3
17.0 0.95 -39.1 0.5 -5.6 -162.3 0.134 -122.4 0.77 -26.1 5.9
18.0 0.94 -48.4 0.5 -6.4 -174.0 0.132 -131.7 0.79 -34.7 5.6
Notes:
F Min: Minimum Noise Figure
GOpt: Optimum Source Reflection Coefficient
Rn: Equivalent noise resistance
E-PHEMT SAV-541+
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com Page 10 of 13
Typical S-parameters, VDS=3V and IDS=80 mA (Fig. 3)
Freq.
(GHz)
S11 S21 S12 S22
MSG/MAG
Mag. Ang. Mag. (dB)
Mag
(dB) Ang. Mag. Ang. Mag. Ang.
MAXIMUM STABLE GAIN (MSG)/MAXIMUM AVAILABLE
GAIN (MAG) vs. FREQUENCY
-15
-10
-5
0
5
10
15
20
25
30
35
40
0 5 10 15 20
Frequency (GHz)
MSG/MAG and S21 (dB)
MSG/MAG
S21(dB)
Typical Noise Parameters, VDS=3V and IDS=80 mA (Fig. 3)
Freq.
(GHz)
F Min.
(dB)
GOpt
(Magnitude)
GOpt
(Angle) Rn/50
Ga
Associated
Gain (dB)
0.5 0.086 0.31 27.68 0.05 28.4
0.7 0.123 0.31 39.97 0.05 26.3
0.9 0.159 0.32 51.98 0.04 24.6
1.0 0.178 0.32 57.88 0.04 23.8
1.9 0.342 0.35 107.88 0.03 19.1
2.0 0.360 0.35 113.08 0.03 18.7
2.4 0.433 0.36 133.22 0.03 17.4
3.0 0.543 0.39 161.34 0.04 15.9
3.9 0.707 0.43 -161.16 0.07 14.1
5.0 0.908 0.49 -122.96 0.13 12.5
5.8 1.055 0.54 -100.45 0.20 11.4
6.0 1.091 0.56 -95.52 0.22 11.2
0.1 0.99 -18.3 29.4 29.4 168.4 0.008 84.4 0.48 -16.4 35.6
0.5 0.84 -79.6 21.8 26.8 129.4 0.031 54.8 0.36 -62.3 28.4
0.9 0.73 -117.7 15.4 23.7 106.5 0.041 42.7 0.27 -93.1 25.7
1.0 0.71 -125.3 14.2 23.1 102.2 0.043 40.4 0.25 -99.8 25.2
1.5 0.66 -153.7 10.2 20.2 85.0 0.051 35.2 0.20 -126.4 23.0
1.9 0.65 -170.2 8.2 18.3 74.1 0.057 32.5 0.18 -144.2 21.6
2.0 0.65 -173.8 7.8 17.9 71.7 0.059 31.6 0.18 -148.3 21.3
2.5 0.64 170.2 6.3 16.1 60.2 0.066 28.2 0.16 -167.0 19.8
3.0 0.64 156.4 5.3 14.5 49.8 0.074 24.7 0.16 176.5 18.6
4.0 0.65 132.9 4.0 12.1 30.0 0.09 16.1 0.17 147.5 15.7
5.0 0.67 112.4 3.2 10.1 11.4 0.106 6.1 0.20 124.0 13.4
6.0 0.70 94.0 2.6 8.4 -6.5 0.12 -5.0 0.24 104.4 11.9
7.0 0.74 77.4 2.2 6.9 -23.8 0.133 -16.3 0.29 87.2 10.8
8.0 0.77 62.1 1.9 5.4 -40.4 0.142 -27.9 0.35 71.9 9.9
9.0 0.81 47.7 1.6 4.0 -56.4 0.15 -39.9 0.42 57.5 9.3
10.0 0.85 33.6 1.4 2.7 -72.3 0.153 -52.0 0.48 43.8 8.9
11.0 0.87 20.5 1.2 1.4 -87.4 0.155 -63.9 0.54 31.2 8.8
12.0 0.90 8.3 1.0 0.2 -102.0 0.155 -75.4 0.59 19.4 8.2
13.0 0.91 -3.5 0.9 -0.8 -116.2 0.156 -86.8 0.63 8.6 7.6
14.0 0.92 -14.4 0.8 -1.8 -129.6 0.156 -97.7 0.66 -1.6 7.2
15.0 0.93 -23.0 0.7 -3.0 -140.7 0.15 -106.2 0.71 -10.2 6.7
16.0 0.95 -30.5 0.6 -4.4 -150.6 0.14 -113.9 0.75 -17.9 6.4
17.0 0.95 -39.1 0.5 -5.4 -161.5 0.135 -122.3 0.77 -26.4 6.0
18.0 0.94 -48.5 0.5 -6.2 -173.4 0.133 -131.2 0.78 -35.0 5.7
Notes:
F Min: Minimum Noise Figure
GOpt: Optimum Source Reflection Coefficient
Rn: Equivalent noise resistance
E-PHEMT SAV-541+
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com Page 11 of 13
Freq.
(GHz)
S11 S21 S12 S22
MSG/MAG
Mag. Avg. Mag. Avg. dB Mag. Ang. Mag. Ang. (dB)
Typical S-parameters, VDS=4V and IDS=60 mA (Fig. 3)
MAXIMUM STABLE GAIN (MSG)/MAXIMUM AVAILABLE
GAIN (MAG) vs. FREQUENCY
-15
-10
-5
0
5
10
15
20
25
30
35
40
0 5 10 15 20
Frequency (GHz)
MSG/MAG and S21 (dB)
MSG/MAG
S21(dB)
Typical Noise Parameters, VDS=4V and IDS=60 mA (Fig. 3)
Freq.
(GHz)
F Min.
(dB)
GOpt
(Magnitude)
GOpt
(Angle) Rn/50
Ga
Associated
Gain (dB)
0.5 0.086 0.34 26.43 0.06 28.1
0.7 0.121 0.34 37.91 0.05 26.0
0.9 0.156 0.34 49.17 0.05 24.2
1.0 0.173 0.34 54.72 0.04 23.4
1.9 0.331 0.35 102.19 0.03 18.7
2.0 0.349 0.35 107.19 0.03 18.3
2.4 0.419 0.36 126.64 0.03 17.0
3.0 0.524 0.37 154.19 0.04 15.4
3.9 0.682 0.41 -168.19 0.06 13.7
5.0 0.875 0.47 -128.23 0.12 12.2
5.8 1.016 0.52 -103.33 0.17 11.2
6.0 1.051 0.54 -97.65 0.18 11.0
0.1 0.99 -17.9 27.9 28.9 168.5 0.008 83.7 0.53 -14.7 35.2
0.5 0.85 -77.9 21.0 26.5 130.2 0.032 54.0 0.40 -57.1 28.2
0.9 0.74 -116.0 15.0 23.5 107.3 0.043 41.4 0.29 -84.8 25.5
1.0 0.72 -123.7 13.9 22.8 102.9 0.044 39.3 0.27 -90.9 25.0
1.5 0.67 -152.3 10.0 20.0 85.5 0.052 33.5 0.21 -115.1 22.8
1.9 0.65 -169.0 8.1 18.1 74.5 0.058 30.2 0.18 -131.8 21.5
2.0 0.65 -172.6 7.7 17.7 72.0 0.059 29.6 0.17 -135.9 21.1
2.5 0.64 171.1 6.2 15.9 60.4 0.066 26.5 0.15 -154.5 19.7
3.0 0.64 157.3 5.2 14.4 49.8 0.073 22.9 0.14 -171.8 18.5
4.0 0.66 133.5 3.9 11.9 29.9 0.088 15.0 0.15 156.0 15.7
5.0 0.68 112.9 3.1 10.0 11.1 0.103 5.6 0.17 129.9 13.4
6.0 0.71 94.4 2.6 8.3 -6.9 0.117 -4.9 0.21 108.6 11.9
7.0 0.74 77.7 2.2 6.8 -24.3 0.13 -16.2 0.26 90.7 10.8
8.0 0.78 62.3 1.9 5.3 -41.1 0.14 -27.3 0.32 74.9 9.9
9.0 0.81 47.9 1.6 4.0 -57.4 0.147 -39.2 0.39 60.2 9.3
10.0 0.85 33.8 1.4 2.6 -73.5 0.151 -51.1 0.46 46.3 9.5
11.0 0.88 20.6 1.2 1.3 -88.9 0.154 -62.9 0.52 33.4 8.8
12.0 0.90 8.5 1.0 0.1 -103.6 0.154 -74.4 0.57 21.5 8.2
13.0 0.91 -3.4 0.9 -1.0 -118.0 0.156 -85.9 0.61 10.6 7.6
14.0 0.92 -14.3 0.8 -2.0 -131.6 0.156 -96.8 0.65 0.3 7.1
15.0 0.94 -22.9 0.7 -3.2 -142.8 0.149 -105.4 0.70 -8.5 6.7
16.0 0.95 -30.4 0.6 -4.6 -152.9 0.14 -113.3 0.74 -16.4 6.3
17.0 0.95 -39.0 0.5 -5.6 -164.0 0.135 -121.7 0.77 -25.0 5.9
18.0 0.95 -48.3 0.5 -6.5 -175.7 0.133 -131.0 0.78 -33.7 5.5
Notes:
F Min: Minimum Noise Figure
GOpt: Optimum Source Reflection Coefficient
Rn: Equivalent noise resistance
E-PHEMT SAV-541+
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com Page 12 of 13
Additional Detailed Technical Information
Additional information is available on our web site www.minicircuits.com. To access this information
enter the model number on our web site home page.
Performance data, graphs, s-parameter data set (.zip file)
Case Style: MMM1362
Plastic molded SOT-343 (SC-70) style package, lead finish: matte tin
Suggested Layout for PCB Design: PL-300
Tape & Reel: F90
Standard quantities availabe on reel: 7” reels with 20, 50, 100, 200, 500, 1K, 2K, or 3K devices.
Characterization Test Board: TB-471+
Environmental Ratings: ENV08T2
Product Marking
54
ESD Rating
Human Body Model (HBM): Class 1A (250 V to < 500 V) in accordance with ANSI/ESD STM 5.1 - 2001
Machine Model (MM): Class M1 (40 V) in accordance with ANSI/ESD STM 5.2 - 1999
MSL Rating
Moisture Sensitivity: MSL1 in accordance with IPC/JEDECJ-STD-020D
Visual
Inspection
Electrical Test SAM Analysis
Reflow 3 cycles,
260°C
Soak
85°C/85RH
168 hours
Bake at 125°C,
24 hours
Visual
Inspection
Electrical Test SAM Analysis
Start
MSL Test Flow Chart
E-PHEMT SAV-541+
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com Page 13 of 13
Recommended Application Circuit
VDS, V (nom) 3 4
IDS, mA
(nom)
60mA 60mA
R1 4320Ω 4320Ω
R2 4320Ω 4320Ω
R3 3570Ω 1210Ω
R4 33.2Ω 16.7Ω
Q1 MMBT3906* MMBT3906*
Q2 MMBT3906* MMBT3906*
C1 0.01μF 0.01μF
C2 0.01μF 0.01μF
L1** 840nH 840nH
L2** 840nH 840nH
R1
Q1
Q2
R4
R2
GATE
DRAIN
C1 C2
INPUT
MATCHING
CIRCUIT
(MUST PASS DC)
OUTPUT
MATCHING
CIRCUIT
(MUST PASS DC)
R3
Vcc (+5V DC)
RF-IN RF-OUT
DC BIAS CIRCUIT
DUT
L1 L2
SOURCE
RF CIRCUIT
* Fairchild Semiconductor™ part number
** Piconics™ part number CC45T47K240G5
Optimized Amplifier Circuits
For band specific, drop-in modules, and as an alternative to designing circuits,
please refer to Mini-Circuits TAMP and RAMP series models which are based
upon SAV/TAV E-PHEMT’s and include all DC blocking, bias, matching and stabilization
circuitry, without need for any external components.
All Datasheets Cannot Be Modified Without Permission
Copyright © Each Manufacturing Company
This datasheet has been downloaded from:
datasheet.eeworld.com.cn
Free Download
Daily Updated Database
100% Free Datasheet Search Site
100% Free IC Replacement Search Site
Convenient Electronic Dictionary
Fast Search System
www.EEworld.com.cn



SAV-541+

相关新闻

相关型号