XT25F64B

 64M -bit Serial FLASH  8192K-byte  256 bytes per programmable page  Support SFDP & Unique ID  Standard, Dual, Quad SPI  Standard SPI: SCLK, CS#, SI, SO, WP#, HOLD#  Dual SPI: SCLK, CS#, IO0, IO1, WP#, HOLD#  Quad SPI: SCLK, CS#, IO0, IO1, IO2, IO3  QPI: SCLK, CS#, IO0, IO1, IO2, IO3  Flexible Architecture  Sector of 4K-byte  Block of 32/64k-byte  Advanced security Features  4*256-Byte Security Registers WithOTP Lock  Software/Hardware Write Protection  Write protect all/portion of memory via software  Enable/Disable protection withWP# Pin  Top or Bottom, Sector or Block selection  Package Options  See 1.1 Available Ordering OPN  All Pb-free packages are compliant RoHS, Halogen-Free and REACH.  Temperature Range & Moisture Sensitivity Level  Industrial Level Temperature. (-40℃ to +85℃), MSL3  Industrial Plus Level Temperature. (-40℃ to +105℃), MSL1  Low Power Consumption  20mA maximum active current  0.2uA maximum power down current  Single Power Supply Voltage: Full voltage range:  2.7~3.6V  Minimum 100,000 Program/Erase Cycle  High Speed Clock Frequency  108MHz for fast read with 30PF load  Dual I/O Data transfer up to 216Mbits/s  Quad I/O Data transfer up to 432Mbits/s  QPI Mode Data transfer up to 384Mbits/s  Continuous Read With 8/16/32/64-byte Wrap  Program/Erase Speed  Page Program time: 250uS typical  Sector Erase time: 60mstypical  Block Erase time: 0.15/0.25stypical 