高功率倍增器

高功率倍增器属性

---

高功率倍增器描述

高功率倍频器

　

MODEL EAMKa-28-SH

Input Frequency: 13.25 to 20 GHz

Input Power: +5dBm (Typical)

Output Frequency: 26.5 to 40 GHz

Output Power: 23 dBm (Min)

Spurious and Harmonics: -20 dBc (Max)

Bias: +8 V/750 mA (Typ)

Input Connector: K(F)

Output Connector: K(F) or WR-28 Waveguide with UG599/U Flange

　

MODEL EME-ADA-1020 / EME-AQA-0510

Input Frequency: 10 to 20 / 5 to 10 GHz

Input Power: +5dBm (Typical)

Output Frequency: 20 to 40 GHz

Output Power: 19 dBm typ,17dBm min / 19 dBm typ,13dBm min

Spurious and Harmonics: -20 dBc (Max)

Bias: +/-5V

Input Connector: K(F)

Output Connector: K(F)

　

MODEL EAMW94-2-SH

Center Frequency: 　 94 GHz(92-96GHz)

Injection-Locking bandwidth: ±1 GHz(min)

Input Frequency: 7.23 ±0.077GHz

Input Power: +7 dBm (min)

Saturated Output Power: 22dBm(158mW Max.)

Operating Voltage/Current: +27±0.5V/0.25A

Output Isolator: integrated

Input Connector: SMA-F

Output Connector: WR-10/UG-387/U-M



MODEL EAMW95-10-H

Input Frequency: 12.85 - 14.28 GHz（option）

Input Power: 10 to 17dBm

Output Frequency: 90 - 100 GHz

Output Power: 5 - 50mW

Multiplication factor: 7

Consumed power: 8 W

Input connector: SMA

Output connector: WR-10/UG-387/U-M



MODEL EAMW96-8-H

Input Frequency: 15.333 – 16.667GHz

Input Power: +5dBm (Min) and +10 dBm (Nominal)

Output Frequency: 96.0 +/-2.0 GHz (Min)(91.998-100.002GHz)

Output Power: +8 dBm (Min)

Harmonics Suppression: 20 dB (Typ)

Bias: +8 V/750 mA (Typ)

Input Connector : SMA (F)

Output Waveguide: WR-10 with UG387/U Mod Flange



高功率MMIC放大器及开关（有最小定货要求）

　

37-40GHz MMIC Ka-band Power Amplifier

Freq: 37 – 40 GHz

Gain: 16 dB typ.

P1dB: 33 dBm typ

RF Input and Output Internally Matched to 50 Ohms

DC bias: ≤10VDC



33-36GHz MMIC Ka-band Power Amplifier

Freq: 33 – 36 GHz

Gain: 16 dB typ.

P1dB: 33 dBm typ

RF Input and Output Internally Matched to 50 Ohms

DC bias: ≤10VDC



26-40GHz MMIC Low Noise Amplifier

RF frequency: 26 to 40 GHz

Noise figure: <2.1 dB

Linear gain: >17 dB

P1dB: 11 dBm, typical

Unconditionally stable

Self-bias design (single supply)

DC bias:≤ 10VDC





18-40GHz SPST Pin Switch Broad Bandwidth

Low Loss, < 1 dB max.

High Isolation, > 37 dB

Excellent Return Loss, < -13 dB

Fast Switching Speed, <5 ns

High Power Handling, 37 dBm Peak,33 dBm CW

Self-bias design on-chip(inductor,capacitor on-chip)

DC bias:≤5VDC



26-45GHz SPDT(Single pole double throw) Switch

Broad Bandwidth, 26-45 GHz

Low Loss, < 1.3dB

High Isolation, > 30 dB typical

Fast Switching Speed, < 5 ns

High Power Handling, 37 dBm Peak,33 dBm CW

Self-bias design on-chip(inductor,capacitor on-chip)

DC bias:≤5VDC



高功率固态放大器模块（有最小定货要求）

　

37-38GHz Ka-band Power Amplifier Module

Freq.: 37–38GHz

Gain: 15,20,30,40,60dB min option

Flattness: +/- 1dB

P1dB: 37dBm Min

NF: 9dB typ.

VSWR: 2:1 max

Voltage: 15VDC / 20A

Connector: WR28(K type as requested)



33.5-34.8GHz Ka-band Power Amplifier Module

Freq.: 33.5–34.8GHz

Gain: 15,20,30,40,60dB min option

Flattness: +/- 1dB

P1dB: 37dBm Min

NF: 9dB typ.

VSWR: 2:1 max

Voltage: 15VDC / 20A

Connector: WR28(K type as requested)

　

34.5-35.5GHz Ka-band Power Amplifier Module

Freq.: 34.5–35.5GHz

Gain: 15,20,30,40,60dB min option

G. Flattness: +/- 1dB

P1dB: 37dBm Min

NF: 9dB typ.

VSWR: 2:1 max

Voltage: 15VDC / 20A

Connector: WR28(K type as requested)

　

High Power CW / Pulsed IMPATT Amplifier Series

Freq.: 33-37/43-47/58-62/92-96/12-140GHz

Bandwith: up to 2GHz depending on numbers of stages

Pulse width: CW

long pulse 1us-1ms/0-50% duty

short pulse 50ns-1us/0-0.5% duty

Power output: 0.1 to 1W @CW

0.2-1.0W @long pulse

3,5,10,15,20W@short pulse

Wavegude size: WR-28/WR-22/WR-15/WR-10/WR-08

　

* 可提供1-50W CW, K to Ka-Band 固态宽带高功率放大器模块,请联络

　

　

---

高功率倍增器相关产品