The MPL115A2 is an absolute pressure sensor with digital output for low cost
applications. A miniature 5 x 3 x 1.2 mm LGA package ideally suits it for portable
electronics and space constrained applications. Low current consumptions of
5 μA during Active mode and 1 μA during Shutdown (Sleep) mode target battery
and other low-power applications. A wide operating temperature range from -40°C
to +105°C fits demanding environmental requirements.
MPL115A2 employs a MEMS pressure sensor with a conditioning IC to provide
accurate pressure measurement from 50 to 115 kPa. An integrated ADC provides
digitized temperature and pressure sensor outputs via an I2C port. Calibration
Data is stored in internal ROM. Utilizing raw sensor output, the host
microcontroller executes a compensation algorithm to render Compensated
Absolute Pressure with 1 kPa accuracy.
The MPL115A2 pressure sensor’s small form factor, low power capability,
precision, and digital output optimize it for barometric measurement applications.
Features
• Digitized pressure and temperature information together with programmed
calibration coefficients for host micro use.
• Factory Calibrated
• 50 kPa to 115 kPa Absolute Pressure
• 1 kPa Accuracy
• 2.375 V to 5.5 V Supply
• Integrated ADC
• I2C Interface
• Monotonic Pressure and Temperature Data Outputs
• Surface Mount RoHS Compliant Package
全新原装现货MPL115A2
电话：0755-85286200
手机：13699837575 廖先生
深圳市创宝来科技有限公司
压力传感器
Maximum Operating Pressure 115kPaMinimum Operating Pressure 50kPa
安装类型 表面贴装
宽度 3mm
封装类型 LGA
尺寸 5 x 3 x 1.2mm
引脚数目 8
最低工作温度 -40 °C
最大工作电源电压 5.5 V
最大过载压力 1000kPa
最小工作电源电压 2.375 V
最高工作温度 +105 °C
长度 5mm
高度 1.2mm
