烨弘轩电子最新到货 有最新批号 朱生 13410068358 微信同号 可提供样品 批量 方案 技术资料 技术支持 竭诚为您提供优质服务。需要查询更多产品 www.yhx-group.com 。
MAX16984 MAX16984RAGI/VY+T MAX16984SATI/V+有现货 可添加我们联系方式获取最优惠价格
原厂原包原标原装每一片都来自正规渠道每一片都可追溯
The MAX16984 combines a 5V automotive-grade step-down converter capable of driving up to 2.5A, a USB host charger adapter emulator, and USB protection switches for automotive USB host applications. The USB protection switches provide high-ESD, short-circuit protection and feature integrated host-charger port-detection circuitry adhering to the USB 2.0 Battery Charging Specification BC1.2 battery charging specification and Chinese Telecommunication Industry Standard YD/T 1591-2009. They also include circuitry for iPod®/iPhone®1.0A and iPad®2.1A dedicated charging modes. The HVD+ and HVD- ESD protection features include protection to ±15kV Air/±8kV Contact on the HVD+ and HVD- outputs to the IEC 61000-4-2 model and 330Ω, 330pF ESD model.
The high-efficiency step-down DC-DC converter operates from a voltage up to 28V and is protected from load dump transients up to 42V. The device is optimized for high-frequency operation and includes resistor-programmable frequency selection from 220kHz to 2.2MHz to allow optimization of efficiency, noise, and board space based on application requirements. The converter has an internal high-side n-channel switch and uses a low forward-drop freewheeling Schottky diode for rectification. There is a small low-side n-channel switch to maintain fixed frequency under light loads. For lower quiescent current operation requirements, the low-side n-channel switch can be disabled to allow skip mode operation under light loads. The converter can deliver up to 2.1A of continuous current at 105°C. The MAX16984S has an integrated spread-spectrum oscillator to improve EMI performance.
The MAX16984 also includes a USB load current-sense amplifier and configurable feedback adjustment circuit designed to provide automatic USB voltage adjustment to compensate for voltage drops in captive cables associated with automotive applications. The MAX16984 limits the USB load current using both a fixed internal peak current threshold of the DC-DC converter and a user-configurable external USB load current-sense amplifier threshold.
Integrated DC-DC and USB Host Charge Emulator Enables 1-Chip Solution Directly from Car Battery to Portable Device
4.5V to 28V (42V Load Dump) Operating Voltage
5V, 2.5A Output Current Capability
Low-Q Current Skip and Shutdown Modes
Soft-Start Reduces Inrush Current
Low-Noise Features Prevent Interference with AM Band and Portable Devices
Fixed-Frequency 220kHz to 2.2MHz Operation
Forced-PWM Option at No Load
Spread Spectrum for EMI Reduction
SYNC Input for Frequency Parking
Optimal USB Power and Communication for Portable Devices
User-Adjustable Voltage Gain Adjusts Output Between 5V and 6.15V for Cable Compensation
±3% Accuracy User-Adjustable USB Current Limit
4Ω USB 2.0 480Mbps/12Mbps Data Switches
Integrated iPod/iPhone/iPad Charge-Detection Termination Resistors
Supports USB BC1.2 Charging Downstream Port(CDP) and Dedicated Charging Port (DCP) Modes
Supports Chinese Telecommunication Industry Standard YD/T 1591-2009
Compatible with USB On-the-Go Specification
High-Speed Pass-Through Mode
Robust Design Keeps Vehicle System and Portable Devices Safe in Automotive Environment
Short-to-Battery Protection on DC-DC Converter
Short-to-Battery Protection on USB Pins
±25kV Air/±8kV Contact ISO 10605
±15kV Air/±8kV Contact IEC 61000-4-2
±15kV Air/±8kV Contact (330Ω, 330pF)
Fault-Indication Active-Low, Open-Drain Output
Reduced Inrush Current with Soft-Start
Overtemperature Protection
-40°C to +125°C Operating Temperature Range
28-Pin, 5mm x 5mm, TQFN and Side-Wettable QFND Packages
MAX16984SATI/V+
MAX16984RATI/V+
MAX16984EVKIT#
MAX16984SAGI/VY+T
MAX16984RATI/V+T
MAX16984SATI/V+T
MAX16984SAGI/VY+
Applications/UsesAutomotive Connectivity
Automotive Radio and Navigation
Dedicated USB Power Charger
Telematics
USB Port for Host and Hub Applications
